CLICK-IN Technology

Reduce your assembly time by minimum 12 minutes for each two bayed enclosures 

The fact that Eldon will always go the extra mile to make life easier for its customers is strongly reflected in the new CLICK-IN technology for accessories. 

Eldon’s latest quick fixation baying solutions deliver panel builders with a fast installation turn-around, increasing their competitive edge, thanks to simplified installation solutions.

The new CLICK-IN technology has been tested against the strictest standards for its loading and lifting capability and vibration resistance.

1. Click-in Internal baying kit

Eldon’s internal baying brackets - CCI, for combinable enclosures are delivered with quick click-in fixing solution, allowing panel builders to implement their bayed enclosure solutions much faster than ever before. This is due to the tool free fixation method as well as the reduction in the baying bracket’s fixation points.

Eldon’s corner baying brackets -  CCM, for combinable enclosures are delivered with quick click-in fixing solution. This fixation method allows you to build bayed enclosure solutions quickly and simply without tools. Installation can be carried out by one person,significantly reducing assembly costs for panel builders.  

Read more

2. Quick fixation mounting plate brackets

The MPA mounting plate brackets are delivered with pre-installed quick fixation click-in, and a retaining bracket that holds the mounting plate in place, before it is fully fitted to the enclosure.This allows one man installation of the mounting plate, significantly reducing assembly costs for panel builders. The mounting plate brackets are available in the mild steel and stainless steel floor standing enclosure ranges, as standard.

Read more

3. New profile system

The CLPF profile system is supplied with the fixation bracket pre-assembled in the profile, thus significantly reducing the assembly time.The CLPF profile system is a 40 mm wide and 25 mm high profile, which can be mounted in all directions on the enclosure’s frame.When the profile is in position, it is fixed with a click-in,therefore no tools are required for the installation.

The innovative fixation system allows brackets to pivot, and overall assembly time is drastically reduced.When mounted on the frame of the enclosure, the profiles are flush with the enclosure’s profiles. Two rows of hole patterns for cage nut fixing and self tapping screws are provided.The CLPF profile system can also be used in combination with other accessories such as sliding nuts, GLM, to mount components which require continuous adjusting in depth.

Read more