Drain plug IP44, rubber, maximum material thickness 4mm
Drain plug IP44, rubber, maximum material thickness 4mm
catalog# DWP02
Bușon de golire ușor de montat, prin care se elimină condensul, pentru a asigura gradul de protecție.
Detalii
Beneficii
Resurse
Modele 3D
Accesoriu
Caracteristici
- Descriere: Dop de scurgere pentru eliminarea apei provenite din condens. Uşor de instalat. Se potriveşte materialelor cu grosimi de maxim 4 mm. Grad de protecţie IP 44.
- Material: Cauciuc.
- Necesită prelucrare: Gaură cu diametrul de 11 mm.
- Cantitate pachet: 10 bucăţi.
- Rubber drain plug to be mounted in the bottom of enclosures
- The plug removes all of the condensed water from the enclosure while maintaining IP 44 protection degree
- The plug is a good solution to control water condensation in situations when it cannot be avoided, as it prevents water accumulating within the bottom of the enclosure
- The plug can be installed later in the field, if water condensation is noticed reducing the additional maintenance costs of bringing the enclosure back into the workshop
- Machining required: Round hole 11 mm diameter
Specificații
Atribute produs
3D Step
Installation Manual / Instruction Sheet
GENERARE CAD
Conectați-vă pentru a descărca modele CAD suplimentare în formatul preferat. Pentru descărcări 2D și 3D fără conectare, faceți clic pe MAI MULTE DESENE CAD, FIȘE TEHNICE ȘI CERTIFICĂRI