H2Omit ventilatieafvoer NM, Niet-metaal, polyester, 32 mm
H2Omit Vent Drains allow accumulated water to drain out the bottom of an enclosure. The UL-approved vent drains also function as an air pressure equalizer, reducing the harmful effects of temperature-induced vacuums that could pull water and moisture into the enclosure.
Industrienormen
UL 508A Listed; Type 4, 4X; File No. E61997
cUL Listed per CSA C22.2 No 94; Type 4, 4X; File No. E61997
Maintains UL/cUL Type 4, 4X rating when properly installed on a UL/cUL Type 4 or 4X enclosure.
NEMA/EEMAC Type 4, 4X
IEC 60529, IPx6
Kenmerken
- Uses gravity to remove collected liquids
- Eén richting mechanische uitschakeling wanneer de druk gelijk is. Voorkomt dat water en verontreinigingen de behuizing binnen kunnen dringen
- Vermindert corrosie die de levensduur van interne elektrische en elektronische componenten kan beperken
- Installs in a 7/8-inch hole in the bottom of enclosure with provided nut or in a 1/2-inch NPT/NPS threaded conduit hub
- Installs in the bottom of mild steel, aluminum, stainless steel or non-metallic enclosures
- Maintains the enclosure UL Type rating when properly installed
- Stainless Steel Vent Drain
- Corrosion-resistant polyester material with a Type 304 stainless steel sleeve
- Non-Metallic Drain Vent
- Corrosion-resistant polyester material
- 2.00-inch long x 1.25-inch outside diameter
Specificaties
Productkenmerken
Bulletinnummer
Approval Agency Certificate
Installation Manual / Instruction Sheet
CAD-GENERATIE
Meld u aan om extra CAD-modellen te downloaden in de indeling van uw keuze. Om 2D- en 3D-modellen te downloaden zonder u aan te melden, klikt u op MEER CAD-TEKENINGEN, SPECIFICATIEBLADEN EN CERTIFICERINGEN