VCOF25 Oil filter, for 1465 W

The Hazardous Location Vortex A/C (HazLoc Vortex A/C) is designed to cool industrial control cabinets located in hazardous locations, using only filtered and dried compressed air to generate the cooling. These systems are ideal for applications where compressed air is available in hazardous locations. With almost no moving parts, these systems are highly reliable and virtually maintenance free.

CE Declaration of Conformity Declaration of Compliance EAC
Feature: Class I, Div. 2, Groups A, B, C, D; Class II, Div. 2, Groups F, G; Class III. Type 4, 4X.
Note Table 2
Use with VHL model capacity 1465 W
Description Oil filter
Item no.: VCOF25
EAN no.: 8713574246072
  • Technical data
  • Features
  • Downloads
  • Certificates

Technical data


Compact, reliable and low-cost solution to cool enclosures. With almost no moving parts, the device uses compressed air to produce cooling. When properly sized for the application, the HazLoc Vortex A/C will maintain the internal enclosure temperature between 24 to 38 °C (75 to 100 °F). The mechanical thermostat will regulate an internal valve to minimize compressed air usage and maintain enclosure temperatures within the range specified. Through continuous operation relative humidity inside the enclosure is maintained low, thus minimising the risk of condensation. The easy mounting through a standard cable hole makes this solution especially suitable to be installed even when the enclosures are already in the field. Top, side, and front mount allows for versatile installation in confined areas. Quieter operation with noise level of 60 to 75 dB.


Polycarbonate and stainless steel exterior with aluminium and brass internal components.

Operating temperature:

Approved for a 75 °F (80 °C) maximum ambient temperature in Class I, Div. 2; Class II, Div. 2; and Class III areas.


Maintains Type 4, 4X.


cULus Classified. Class I, Div. 2, Groups A through D; Class II, Div. 2, Groups F, G; and Class III locations (when used with an approved purge/pressurization system); File No. E364567.

Pack quantity:

1 piece, supplied with five-micron, automatic drain compressed air: filter, cold ducting kit, cold air muffler, and check valve.


The HazLoc Vortex A/C shall only be used in conjunction with a properly sized enclosure purge and pressurization system that must be able to vent the additional air introduced by the HazLoc Vortex A/C. The purge and pressurization system must be selected and supplied by the end user.



Vortex cooler with hazardous location classification Class I, Div. 2, Groups A, B, C, D; Class II, Div. 2, Groups F, G; Class III locations (when used with and approved purge/pressurization system). The device has almost no moving parts.


Time and cost savings in the end-use investigation process of the final assembly. The maintenance-free cooling solution prevents unnecessary downtime.


Certification of final assembly is easier if installed components are classified for hazardous locations. The vortex cooler provides a virtually maintenance-free cooling solution.

Image (JPG 445 x 445 px) VHL_1 19 KB
Image (JPG 445 x 445 px) VHL_VCOF 19 KB
Item sheet (PDF) VCOF25 ENGLISH 201 KB
Mounting instructions document (PDF) 89103851_VHL09_15_25 333 KB
Mounting instructions document (PDF) 89103852_VHL50 284 KB
Product sheet (PDF) VHL 355 KB
Product sheet (PDF) VHL(ENGLISH) 85 KB
Document (PDF) CE Declaration of Conformity 88 KB
Document (PDF) Declaration of Compliance 77 KB
Document (PDF) EAC 2 MB