TLCS600 Connection cable door switch

This door switch, supplied with a prewired cable reduces the required installation time, and will allow lights to turn on, or off, when the enclosure door is opened or closed, without the need for any manual interference.

TLCS600 Web Image
Description Cable for door switch
Item no.: TLCS600
EAN no.: 8713574166707
  • Technical data
  • Features
  • Downloads
  • Certificates

Technical data


Door switch made of PC/ABS for the TLC and TLCL lights. Can be mounted on the inside hole pattern of the enclosure's frame in floor standing enclosures by means of a plug and play principle. A very slim design is guaranteed due to the integrated micro switch. This leaves a maximum aperture space. The switch is supplied with a pre-wired cable. The auto positioning system of the door switch assures that the switch is always in the correct position.



Pack quantity:

1 piece with mounting accessories.



Door switch with a voltage free contact and cable, to switch Eldon's enclosure lights, TLC or TLCL on and off.


The door switch can be installed easily inside the enclosure and is operated by either opening or closing the enclosure's door in order to switch the enclosure light on or off automatically, without any additional operation. The door switch is delivered with pre-wired cable.


The door switch does not waste additional energy as it breaks electrical contact with the enclosure light when operated. This means that when the enclosure's door is closed the light will turn off and turn on when the door is opened. The installation time is reduced due to the pre-wired cable.

Image (JPG 600 x 600 px) TLCS600 Web Image 126 KB
Item sheet (PDF) TLCS600 ENGLISH 147 KB
Mounting instructions document (PDF) TLCS01 General accessories 1 MB
Product sheet (PDF) TLCS 63 KB
Document (PDF) EAC 877 KB