S2M10VP22 Vertical motion pedestal

Height-adjustable tubes allow enclosure to be positioned at the optimal viewing height for different operators. Requires the 48-mm Round Tube Flange Coupling (S2MFC48) and Adapter (S2MA48) for attachment to Hoffman enclosures with a 60 x 60-mm hole pattern (i.e., required for attaching to Concept HMI, CC2000, CC4000). Adjustable from 1130 mm (44.49 in.) to 1380 mm (54.33 in.) with internal gas springs. Four models support loads ranging from 11 to 77 lb. (4.9 to 34.9 kg). Height is fixed in place at any position by the locking handle. Cables are separated from gas springs inside the tube. Internal strain-relief for cables inside the tube. Can be attached to Small Pedestal Base, Large Pedestal Base, Vertical Wall Joint, Wall Flange, Rotary Base, Elbow or Rotatable Elbow. Aluminum construction. Tube cannot be inverted for overhead mounting on the enclosure. The weight of the coupling, adapter plate, enclosure and internal components must be factored into the load when selecting a tube.

S2M10VP
Characteristics  
Load capacity 22 lb, 10 kg
Item no.: S2M10VP22
EAN no.: 8713574236158
  • Technical data
  • Features
  • Downloads

Technical data

Additional information:

Height-adjustable tubes allow enclosure to be positioned at the optimal viewing height for different operators. Requires the 48-mm Round Tube Flange Coupling (S2MFC48) and Adapter (S2MA48) for attachment to Hoffman enclosures with a 60 x 60-mm hole pattern (i.e., required for attaching to Concept HMI, CC2000, CC4000). Adjustable from 1130 mm (44.49 in.) to 1380 mm (54.33 in.) with internal gas springs. Four models support loads ranging from 11 to 77 lb. (4.9 to 34.9 kg). Height is fixed in place at any position by the locking handle. Cables are separated from gas springs inside the tube. Internal strain-relief for cables inside the tube. Can be attached to Small Pedestal Base, Large Pedestal Base, Vertical Wall Joint, Wall Flange, Rotary Base, Elbow or Rotatable Elbow. Aluminum construction. Tube cannot be inverted for overhead mounting on the enclosure. The weight of the coupling, adapter plate, enclosure and internal components must be factored into the load when selecting a tube.

Note:

The maximum weight a medium swing arm can support depends on the length of the arm and the system structure. See diagram in the mounting instructions.

Features

Feature:

Medium swing arm system with a wide range of accessories. Ideal for use with the control panel, OICP, or with the control enclosure, OICE.

Advantage:

A standard solution available off the shelf, that allows for the design of customized solutions.

Benefit:

This fully tested solution, with a loading capacity of 1250 N, has a short delivery time. It allows for the operator to position the control panel, or enclosure, in the exact position required.

Dxf (DXF) S2M10VP22 2 MB
Image (JPG 800 x 800 px) S2M10VP 14 KB
Item sheet (PDF) S2M10VP22 ENGLISH 79 KB
Mounting instructions document (PDF) S2 MI_V0 5 MB
Product sheet (PDF) S2M10VP(ENGLISH) 80 KB
Product sheet (PDF) S2M10VP22 2 MB
Product sheet (PDF) S2M10VP22(ENGLISH) 80 KB
Step (STEP) S2M10VP22 3 MB