OICP495420 HMI, 495x542x200

The aluminium operator interface control panel, OICP, has a pre-machined hole pattern to allow for the desired fixation to a swing arm, plus a removable front plate at a IP 65 protection degree. Components can be easily fitted thanks to the removable front plate, but will also be easily accessible through a removable rear panel. Side handles on the enclosure allow for easy movement of the enclosure into the desired working position. The aluminium body will dissipate more heat than a mild steel body, which may eliminate the need for additional ventilation.

CE UKCA EAC GOST IP Declaration of Compliance
Feature: IP 65
OICP Product Image
Height 495 mm
Width 542 mm
Depth 200 mm
Weight (kg) 10.25
OICP Catalogue drawing image
Item no.: OICP495420
EAN no.: 8713574117785
  • Technical data
  • Features
  • Downloads
  • CAD
  • Certificates

Technical data


Body: Al Mg Si05. Rear plate: Al Mg. Corners: AlSI 12.


IP 65.


Body and rear plate: anodised aluminium. Corners: RAL 7016.

Mounting requirements:

OIFP front panel is not included in the standard delivery and needs to be ordered separately.


Body, screwed rear plate, front plate mounting kit, and mounting accessories.



Aluminium operator interface control panel, with a pre-machined hole pattern to mount onto a swing arm system, removable aluminium front plate accessory and a IP 65 protection degree.


Components can be installed easily because of the removable front panel (supplied as an accessory) and accessible because of the removable rear panel. The enclosure's pre-machined cut-out allows the panel to be quickly mounted to the swing arm system in the field. The pre-mounted enclosure side handles allow customers to manipulate the enclosure easily when performing operations. The aluminium body will dissipate a larger amount of heat, that has been generated from the installed components.


The enclosure reduces customer's labour cost and allows ergonomic use in the field, due to the pre-installed handles. The internal temperature of the control panel is kept low which may remove the requirement for ventilation.


The aluminium front plate (OIFP), must be ordered separately.

General drawing (PDF) OICP General Drawing 63 KB
Image (JPG 591 x 800 px) OICP Catalogue drawing image 65 KB
Image (JPG 800 x 800 px) OICP Product Image 78 KB
Item sheet (PDF) OICP495420 ENGLISH 169 KB
Mounting instructions document (PDF) HMI OICP 331 KB
Product sheet (PDF) OICP(ENGLISH) 642 KB



* Drawings generated according to ISO standard
Document (PDF) CE UKCA 99 KB
Document (PDF) EAC 2 MB
Document (PDF) GOST 7 MB
Document (PDF) IP Declaration of Compliance 264 KB