MPGS10-316 Console, 985x1000x400

The stainless steel compact console, MPGS, in a IP 55/56 protection degree is available off the shelf. It has a hinged desk panel, and the ergonomic design allows for easy installation and access to HMI-equipment- It also increases the mounting space available. This console can be installed in virtually any environment, grade dependent.

CE UKCA EAC GOST IP Declaration of Compliance Kema Keur - DEKRA Lloyd's Register cULus_UL Listed IEC 61439 Declaration of Compliance
Feature: IP 66 TYPE 4X, 12, 13 IK 10 (single door); IP 55 TYPE 12, 13 IK 10 (double door)
MPGS Product Image
Note Stainless steel
Height 985 mm
Width 1000 mm
Depth 400 mm
Mounting Plate
790 mm
Mounting Plate
899 mm
Max. enclosure
useful depth
357.5 mm
Usable depth 357.5
Weight (kg) 80.00
MPG - MPGS Catalogue drawing image
Item no.: MPGS10-316
EAN no.: 8713574157217
  • Technical data
  • Features
  • Downloads
  • CAD
  • Certificates

Technical data


AISI 304 pre-grained stainless steel / AISI 316L (on request). Body and door: 2 mm. Rear panel: 1.5 mm. Bottom plates: 1.5 mm. Mounting plate: 2.5 mm galvanized steel.


Folded and seam welded. Console construction includes a base that provides a distance between the floor and the lower part of the door/s, acting as an integrated plinth.

Doors and panels:

Single folded surface mounted with hinges, allowing left and right-hand opening to base door. Angle 12° from horizontal. Concealed hinges, on top edge, allow 90° opening. Panel held open by self engage/self release mechanical panel stay. Double door on 1200 wide base units.

Mounting plate:

Standard mounting plate in base unit.


Double-bit 3 mm locks for top panel. For base, two double-bit 3 mm locks.

Cable inlet:

Bottom opening for cable access. Bottom plate for cable glanding supplied as standard.


M8 threaded studs on body, door, top panel and rear panel.


400 pre-grained stainless steel.


Single door: IP 66 | TYPE 4X, 12, 13 | IK 10. Double door: IP 55 | TYPE 12, 13 | IK 10.


Mounting plate and suitable nuts and washers for earthing. The console is delivered on a wooden pallet.



Stainless steel compact console, with a hinged desk panel, and a IP 55/66 protection degree.


Customers can choose consoles that meet their size requirements, off the shelf. The top desk panel provides customers with a surface to easily install and maintain HMI equipment, due to the integrated hinges. The installed components inside the enclosure will be safe and secure due to the high protection degree.


Customers can receive consoles with a short delivery time, that match their size requirements. The console's ergonomic design lets customers install and access the HMI equipment easily. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure. Stainless steel consoles can be installed in almost any environment, grade dependent.


Single door consoles have a IP 66 protection degree whereas double door consoles have a IP 55 protection degree.

Image (JPG 594 x 800 px) MPG - MPGS Catalogue drawing image 157 KB
Image (JPG 600 x 600 px) MPGS Product Image 92 KB
Item sheet (PDF) MPGS10-316 ENGLISH 355 KB
Mounting instructions document (PDF) HMI MPG-MPGS 1022 KB
Product sheet (PDF) MPGS(ENGLISH) 1007 KB



* Drawings generated according to ISO standard
Document (PDF) CE UKCA 100 KB
Document (PDF) EAC 2 MB
Document (PDF) GOST 7 MB
Document (PDF) IP Declaration of Compliance 264 KB
Document (PDF) Kema Keur - DEKRA 769 KB
Document (PDF) Lloyd's Register 630 KB
Document (PDF) cULus_UL Listed 427 KB
Document (PDF) IEC 61439 Declaration of Compliance 258 KB