MPG12R5 Console, 985x1200x400

The mild steel compact console, MPG, in a IP 55/56 protection degree is available off the shelf. It has a hinged desk panel, and the ergonomic design allows for easy installation and access to HMI-equipment. It also increases the mounting space available. Stainless steel top panels may be used as an alternative when the console is exposed chemical agents, etc.

CE UKCA cULus_UL Listed IP Declaration of Compliance IEC 61439 Declaration of Compliance
Feature: IP 66 TYPE 4, 12, 13 IK 10 (single door); IP 55 TYPE 12, 13 IK 10 (double door)
MPG Product Image
Note Mild steel
Height 985 mm
Width 1200 mm
Depth 400 mm
Mounting Plate
790 mm
Mounting Plate
1099 mm
Max. enclosure
useful depth
333 mm
Usable depth 333
Weight (kg) 89.00
MPGMPG - MPGS Catalogue drawing image
Item no.: MPG12R5
EAN no.: 8713574128026
  • Technical data
  • Features
  • Downloads
  • CAD
  • Certificates

Technical data


Body and door: 1.5 mm mild steel. Rear panel. 1.5 mm mild steel. Bottom plates: 1.2 mm galvanized steel. Mounting plate: 2.5 mm galvanized steel.


Folded and seam welded. Console construction includes a base that provides a distance between the floor and the lower part of the door/s, acting as an integrated plinth.

Doors and panels:

Single folded surface mounted with hinges, allowing left and right-hand opening to base door. Angle 12° from horizontal. Concealed hinges on top edge allow 90° opening. Panel held open by self engage/self release mechanical panel stay. Double door on 1200 and 1600 mm wide base units.

Mounting plate:

Standard mounting plate in base unit.


Double-bit 3 mm locks for top panel. For base, two double-bit 3 mm locks.

Cable inlet:

Bottom opening for cable access. Bottom plates for cable glanding supplied as standard.


M8 threaded studs on body, door, top panel and rear panel.


RAL 7035 structured powder coating.


Single door: IP 66 | TYPE 4, 12, 13 | IK 10. Double door: IP 55 | TYPE 12, 13 | IK 10.


Mounting plate and suitable nuts and washers for earthing. The console is delivered on a wooden pallet.



Mild steel compact console, with a hinged desk panel, and a IP 55/66 protection degree.


Customers can choose consoles that meet their size requirements, off the shelf. The top desk panel provides customers with a surface to easily install and maintain HMI equipment, due to the integrated hinges. The installed components inside the enclosure will be safe and secure due to the high protection degree.


Customers can receive consoles with a short delivery time, that match their size requirements. The console's ergonomic design lets customers install and access the HMI equipment easily. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure.


Stainless steel top section panels (MPPS) are available as accessories. Console desk sections are normally heavily used, due to the installed control components. Therefore, It is recommended to replace the panel on mild steel consoles, that are exposed to high levels of use, with stainless steel panels. Replacing mild steel sections for stainless steel prolongs the console's life as they are more resistant to corrosion. This is especially important in industries where the operators are exposed to chemical agents and could easily transfer them onto the console, when operated. Single door consoles have a IP 66 protection degree whereas double door consoles have a IP 55 protection degree.

Image (JPG 800 x 800 px) MPG 43 KB
Image (JPG 594 x 800 px) MPG - MPGS Catalogue drawing image 87 KB
Image (JPG 800 x 450 px) MPG Product Image 30 KB
Item sheet (PDF) MPG12R5 ENGLISH 249 KB
Mounting instructions document (PDF) HMI MPG-MPGS 1022 KB
Product sheet (PDF) MPG(ENGLISH) 911 KB



* Drawings generated according to ISO standard
Document (PDF) CE UKCA 100 KB
Document (PDF) cULus_UL Listed 427 KB
Document (PDF) IP Declaration of Compliance 264 KB
Document (PDF) IEC 61439 Declaration of Compliance 258 KB