MPG10R5 Console, 985x1000x400

The mild steel compact console, MPG, in a IP 55/56 protection degree is available off the shelf. It has a hinged desk panel, and the ergonomic design allows for easy installation and access to HMI-equipment. It also increases the mounting space available. Stainless steel top panels may be used as an alternative when the console is exposed chemical agents, etc.

CE Declaration of Conformity CSA GOST Kema Keur - DEKRA Lloyd's Register cULus_UL Listed IEC 61439 Declaration of Compliance
Feature: IP 66 TYPE 4, 12, 13 IK 10 (single door); IP 55 TYPE 12, 13 IK 10 (double door)
MPG Product Image
Characteristics  
Note Mild steel
Height 985 mm
Width 1000 mm
Depth 400 mm
Mounting Plate
Height
790 mm
Mounting Plate
Width
899 mm
Max. enclosure
useful depth
333
Usable depth 333
Weight (kg) 78.00
MPG - MPGS Catalogue drawing image
Item no.: MPG10R5
EAN no.: 8713574128033
  • Technical data
  • Features
  • Downloads
  • Certificates

Technical data

Material:

Body and door: 1.5 mm mild steel. Rear panel. 1.5 mm mild steel. Bottom plates: 1.2 mm galvanized steel. Mounting plate: 2.5 mm galvanized steel.

Body:

Folded and seam welded. Console construction counts with a base that provides a distance between the floor and the lower part of the door/s acting as an integrated plinth.

Doors and panels:

Single folded surface mounted with hinges allowing left and right-hand opening to base door. Angle 12° from horizontal. Concealed hinges on top edge allow 90° opening. Panel held open by self engage/self release mechanical panel stay. Double door on 1200 and 1600 mm wide base units.

Mounting plate:

Standard mounting plate in base unit.

Lock:

Double-bit 3 mm locks for top panel. For base, two double-bit 3 mm locks. Other options available. See wall mounting section.

Cable inlet:

Bottom opening for cable access. Bottom plates for cable glanding supplied as standard.

Earthing:

M8 threaded studs on body, door, top panel and rear panel.

Finish:

RAL 7035 structured powder coating.

Protection:

Single door: IP 66 | TYPE 4, 12, 13 | IK 10. Double door: IP 55 | TYPE 12, 13 | IK 10.

Approvals:

CE, CSA, GOST, Kema Keur - DEKRA, Lloyd's Register, cULus_UL Listed.

Delivery:

Mounting plate and suitable nuts and washers for earthing. The console is delivered on a wooden pallet.

Features

Feature:

Mild steel compact console, with a hinged desk panel, and a IP 55/66 protection degree.

Advantage:

Customers can choose consoles that meet their size requirements, off the shelf. The top desk panel provides customers with a surface to easily install and maintain HMI equipment, due to the integrated hinges. The installed components inside the enclosure will be safe and secure due to the high protection degree.

Benefit:

Customers can receive consoles with a short delivery time, that match their size requirements. The console's ergonomic design lets customers install and access the HMI equipment easily. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure.

Comment:

Stainless steel top section panels (MPPS) are available as accessories. Console desk sections are normally heavily used, due to the installed control components. Therefore, It is recommended to replace the panel on mild steel consoles, that are exposed to high levels of use, with stainless steel panels. Replacing mild steel sections for stainless steel prolongs the console's life as they are more resistant to corrosion. This is especially important in industries where the operators are exposed to chemical agents and could easily transfer them onto the console, when operated. Single door consoles have a IP 66 protection degree whereas double door consoles have a IP 55 protection degree.

CAD 2D drawing (DXF) MPG10R5 2 MB
CAD 2D drawing (PDF) MPG10R5 133 KB
CAD 3D drawing (STEP) MPG10R5 8 MB
Image (JPG 594 x 800 px) MPG - MPGS Catalogue drawing image 157 KB
Image (JPG 600 x 600 px) MPG Product Image 80 KB
Item sheet (PDF) MPG10R5 ENGLISH 305 KB
Mounting instructions document (PDF) HMI MPG-MPGS 664 KB
Product sheet (PDF) MPG 134 KB
Document (PDF) CE Declaration of Conformity 145 KB
Document (PDF) CSA 736 KB
Document (PDF) GOST 209 KB
Document (PDF) Kema Keur - DEKRA 769 KB
Document (PDF) Lloyd's Register 481 KB
Document (PDF) cULus_UL Listed 427 KB
Document (PDF) IEC 61439 Declaration of Compliance 45 KB