MPCS083-316 Base console, 700x800x500

This stainless steel combinable console system, MPCS, has a IP 55/56 protection degree. It includes three interchangeable sections, top, desk and bottom. The system is very flexible and the various possible combinations can meet many design requirements. The ergonomic design of the top and desk units allows for easy installation and access to HMI-equipment, plus increases the mounting space available. This console can be installed in virtually any environment, grade dependent.

CE Declaration of Conformity CSA GOST Kema Keur - DEKRA Lloyd's Register cULus_UL Listed IEC 61439 Declaration of Compliance
Feature: IP 66 TYPE 4X, 12, 13 IK 10 (single door); IP 55 TYPE 12, 13 IK 10 (double door)
MPCS Product Image
Characteristics  
Note Base units with mounting plate, Stainless steel
Height 700 mm
Width 800 mm
Depth 500 mm
Mounting Plate
Height
590 mm
Mounting Plate
Width
699 mm
Max. enclosure
useful depth
470.5
Usable depth 470.5
Weight (kg) 51.00
MPC - MPCS Catalogue drawing image
Item no.: MPCS083-316
EAN no.: 8713574112285
  • Technical data
  • Features
  • Downloads
  • Certificates

Technical data

Material:

AISI 304 pre-grained stainless steel / AISI 316L (on request). Body and door: 2 mm. Rear panel: 1.5 mm. Bottom plates: 1.5 mm. Mounting plate: 2.5 mm galvanized steel.

Body:

Folded and seam welded. Console construction counts with a base that provides a distance between the floor and the lower part of the door/s acting as an integrated plinth.

Doors and panels:

Single folded surface mounted with hinges allowing left and right-hand opening to base door. Top section and desk panels held open by self engage/self release mechanical panel stays. Concealed hinges allowing 90° opening on the desk. Double doors on 1200 mm and 1600 mm wide base units.

Mounting plate:

Standard in base unit. Fixed by fixing brackets on C rail, top and bottom for depth adjustment. Optional in desk and top section units.

Lock:

Double-bit 3 mm locks for top section and desk unit. For base, two double-bit 3 mm locks. Other options available. See wall mounting section.

Cable access:

Bottom open in base unit for cable access. Bottom plates for cable glanding supplied as standard.

Earthing:

M8 threaded studs on bodies, doors and rear panels.

Finish:

240s pre grained stainless steel (average 0.5 micron).

Protection:

Single door: IP 66 | TYPE 4X, 12, 13 | IK 10. Double door: IP 55 | TYPE 12, 13 | IK 10.

Approvals:

CE, CSA, GOST, Kema Keur - DEKRA, Lloyd's Register, cULus_UL Listed.

Delivery:

The base unit is provided with a mounting plate as standard. Desk and top section units have mounting plates provided as accessories. All top and base apertures can be closed by choosing the appropriate accessory plate. Suitable nuts and washers for the various earthing studs are provided.

Features

Feature:

Stainless steel combinable console, available in three separate sections, with a IP 55/66 protection degree.

Advantage:

A flexible solution where customers can choose the console sections that meet size and design requirements, off the shelf, in order to create the console configuration required for their application. Each standalone console section will maintain the security and protection degree.

Benefit:

Customers can receive consoles with a short delivery time, that match their size requirements. The ergonomic design of the top and desk unit, lets customers install and access HMI equipment easily, which increases the console's available mounting space. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure. Stainless steel consoles can be installed in almost any environment, grade dependent.

Comment:

Single door consoles have a IP66 protection degree whereas double door consoles have a IP 55 protection degree.

CAD 2D drawing (DXF) MPCS083 728 KB
CAD 2D drawing (PDF) MPCS083 80 KB
CAD 3D drawing (STEP) MPCS083 7 MB
Image (JPG 594 x 800 px) MPC - MPCS Catalogue drawing image 119 KB
Image (JPG 600 x 600 px) MPCS Product Image 80 KB
Item sheet (PDF) MPCS083-316 ENGLISH 304 KB
Mounting instructions document (PDF) HMI MPC-MPCS 768 KB
Document (PDF) CE Declaration of Conformity 145 KB
Document (PDF) CSA 736 KB
Document (PDF) GOST 514 KB
Document (PDF) Kema Keur - DEKRA 769 KB
Document (PDF) Lloyd's Register 481 KB
Document (PDF) cULus_UL Listed 427 KB
Document (PDF) IEC 61439 Declaration of Compliance 45 KB