MKD14123R5 Floor standing, 1400x1200x300

The mild steel double door compact floor standing enclosure range, MKD, is ideal for installation in confined spaces where a single door, when opened, would take up too much space in front of the enclosure. The doors' loading capacity also increases as it is divided over two doors. With a IP 55 protection degree, components inside the enclosure are well protected and makes it well suited for many different applications.

CE Declaration of Conformity CSA EAC GOST IP Declaration of conformity Kema Keur - DEKRA Lloyd's Register cULus_UL Listed IEC 61439 Declaration of Compliance
Feature: IP 55 TYPE 12, 13 IK 10
MKD Product Image
Characteristics  
Note With mounting plate
Height 1400 mm
Width 1200 mm
Depth 300 mm
Mounting Plate
Height		 1294 mm
Mounting Plate
Width		 1094 mm
Max. enclosure
useful depth 		259 mm
Weight (kg) 109.00
MKD Catalogue drawing image
Item no.: MKD14123R5
EAN no.: 8713574226456
  • Technical data
  • Features
  • Downloads
  • CAD
  • Certificates

Technical data

Material:

Body: 1.35 mm painted steel. Rear and roof panels: 1.5 mm painted steel. Door: 2 mm painted steel. Mounting plate: 3 mm galvanized steel. Bottom plates: 1 mm galvanized steel.

Body:

Four times folded and seam-welded frame. Integrated depth profiles with hole pattern, allowing mounting plate adjustment in depth.

Doors:

Mounted with four hinges. Including door frame with 25 mm hole pattern. Standard doors cannot be reversed. Separate doors to be ordered for left hand door locking.

Rear panel:

Fitted by M6 torx screws. Standard facilities for rear door mounting. Split rear panels on 1600 mm wide enclosures.

Roof panel:

Removable.

Lock:

Espagnolette 4-point locking system in the main door and 2-point locking system in the slave door. Standard double-bit lock with 3 mm insert. Standard inserts, cylinders, lift handles and T-handles are available as accessories.

Bottom plates:

Consists of three pieces.

Mounting plate:

Double folded and slides into position. Adjustable in depth by steps of 25 mm, with the MPD02 accessory. Supplied, attached on the outside of the enclosure packaging.

Earthing:

All panels are earthed through their fittings and are equipped with a separate earthing stud.

Finish:

RAL 7035 structured powder coating.

Protection:

Complies with IP 55 | TYPE 12, 13 | IK 10.

Delivery:

Body with fitted door, rear panel, roof panel, bottom plates, mounting plate (except in PE version) and door frame. Delivery also includes earthing bolts. The enclosure is delivered on a pallet identical to the enclosure width. All packing material is recyclable.

Features

Feature:

Mild steel double door compact floor standing enclosure, with a IP 55 protection degree.

Advantage:

The space required immediately in front of the enclosure is reduced due to the width of each enclosure door being half that of the enclosure. This also results in the door's loading capacity being higher, as it is split over two doors. The installed components inside the enclosure will be safe and secure due to the high protection degree.

Benefit:

Large enclosures can be installed in areas where there is limited access space. The enclosure's doors can support heavy loads, such as, cooling units, due to its increased loading capability. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure.
Image (JPG 591 x 800 px) MKD Catalogue drawing image 135 KB
Image (JPG 600 x 600 px) MKD Product Image 86 KB
Mounting instructions document (PDF) Floor standing combinable and compact 67 MB
Product sheet (PDF) MKD(ENGLISH) 319 KB
Template (PDF) New locking system - Label template 133 KB

Quality:

Format:

Download
Document (PDF) CE Declaration of Conformity 62 KB
Document (PDF) CSA 251 KB
EAC
Document (PDF) GOST 514 KB
Document (PDF) IP Declaration of conformity 126 KB
Document (PDF) Kema Keur - DEKRA 275 KB
Document (PDF) Lloyd's Register 465 KB
Document (PDF) cULus_UL Listed 669 KB
Document (PDF) IEC 61439 Declaration of Compliance 82 KB