MCSS20108RD25 Floor standing, 2000x1000x800

The stainless steel 316L single door combinable floor standing enclosure range, MCSS-OG, with a IP 66 protection degree, is available off the shelf in 2 or 2.5 mm panel thickness, different sizes and configurations. The risk for component failure, and with that unnecessary downtime, is eliminated as water and dust are prevented from entering the enclosure. This enclosure range is well suited for almost any environment, grade dependent.

CE Declaration of Conformity DNV-GL GOST Kema Keur - DEKRA Lloyd's Register cULus_UL Listed IEC 61439 Declaration of Compliance
Feature: IP 66 TYPE 4X, 12 IK 10
MCSS Web Product Image
Characteristics  
Note With mounting plate and rear door
Height 2000 mm
Width 1000 mm
Depth 800 mm
Thickness 2.5 mm
MCSS Catalogue drawing ImageMCSS Catalogue drawing image
Item no.: MCSS20108RD25
EAN no.: 8713574228481
  • Technical data
  • Downloads
  • Certificates

Technical data

Material:

AISI 316L pre-grained stainless steel. Frame: 1.5 mm. Door: 2 or 2.5 mm. Rear, roof and bottom plate: 2 or 2.5 mm. Mounting plate: 3 mm galvanized steel.

Frame:

Seam welded reversed open profiles with 25 mm hole pattern according to DIN 43660.

Door:

Mounted with four hinges allowing left or right hand opening. Including door frame with 25 mm hole pattern.

Rear:

Rear panel fitted by M6 tork screw. Rear door instead of rear panel.

Side panels:

Supplied as an accessory.

Roof panel:

Removable.

Lock:

Espagnolette locking system with lock catcher made in AISI 316L and additional locks in top and bottom for enclosures with W=1000 mm. Swing handle SS 316L with half cylinder keyed EK 333.

Bottom plates:

One piece bottom plate with injected polyurethane gasket to ensure maximum sealing or two pieces for the rear door version.

Mounting plate:

Double folded and slides into position. Adjustable in depth by steps of 25 mm with the MPD02 accessory. Mounting plate is delivered attached on the outside of the enclosure packaging. For Enclosure with rear doors, two mounting plates mounted back to back with MPBB06.

Earthing:

All panels are earthed through their fittings and are equipped with a separate earthing stud.

Finish:

240s pre-grained stainless steel (0,5 microns average).

Protection:

Complies with IP 66 | TYPE 4X, 12 | IK 10. if are used with SPMSXXXXOG.

Approvals:

CE, EAC, DNV-GL, GOST, Kema Keur, Lloyds shipping, cULus_listed.

Mounting requirements:

Standard delivery ready for combined installation. For stand-alone installation add side panels.

Delivery:

Frame with fitted door, rear panel, roof panel, bottom plate, mounting plate and door frame. Delivery also includes earthing bolts. Delivered on a pallet which is identical to the width of the enclosure to allow suiting without removal. All packing material is recyclable.
[Missing text /downloadcenter/ıtemsheet for en] (PDF) MCSS20108RD25 ENGLISH 331 KB
General drawing (PDF) MCSS OG General Drawing 181 KB
Image (JPG 591 x 800 px) MCSS Catalogue drawing Image 120 KB
Image (JPG 591 x 800 px) MCSS Catalogue drawing image 121 KB
Image (JPG 800 x 800 px) MCSS Web Product Image 49 KB
Mounting instructions document (PDF) Floor standing stainless steel combinable 56 MB
Document (PDF) CE Declaration of Conformity 190 KB
Document (PDF) DNV-GL 368 KB
Document (PDF) GOST 7 MB
Document (PDF) Kema Keur - DEKRA 275 KB
Document (PDF) Lloyd's Register 629 KB
Document (PDF) cULus_UL Listed 669 KB
Document (PDF) IEC 61439 Declaration of Compliance 102 KB