MCSS18065 Floor standing, 1800x600x500

The stainless steel single door combinable floor standing enclosure range, MCSS, with a IP 56 protection degree, is available off the shelf in many different sizes. The risk for component failure, and with that unnecessary downtime, is eliminated as water and dust are prevented from entering the enclosure. This enclosure range is well suited for almost any environment, grade dependent.

CE Declaration of Conformity DNV-GL GOST Kema Keur - DEKRA Lloyd's Register cULus_UL Listed IEC 61439 Declaration of Compliance
Feature: IP 56 TYPE 4X, 12, 13 IK 10
MCSS Product Image
Characteristics  
Height 1800 mm
Width 600 mm
Depth 500 mm
Mounting Plate
Height
1694 mm
Mounting Plate
Width
494 mm
Weight (kg) 96.00
MCSS Catalogue drawing image
Item no.: MCSS18065
EAN no.: 8713574191648
  • Technical data
  • Features
  • Downloads
  • Certificates

Technical data

Material:

AISI 304L pre-grained stainless steel / AISI 316L. Frame: 1.5 mm. Door: 2 mm. Rear, roof and side panels: 1.5 mm. Bottom plates: 1.5 mm stainless steel. Mounting plate: 3 mm galvanized steel.

Frame:

Seam welded reversed open profiles with 25 mm hole pattern according to DIN 43660.

Door:

Mounted with four hinges allowing left or right hand opening. Including door frame with 25 mm hole pattern.

Rear panel:

Fitted by M6 torx screws. Standard facilities for rear door mounting.

Side panels:

Supplied as an accessory.

Roof panel:

Removable.

Lock:

Espagnolette 4-point locking system. Does not interfere with the enclosure inner space. Standard double-bit 3 mm insert. Standard inserts, cylinders, lift handles and T-handles are available as accessories.

Bottom plates:

One piece bottom plate with injected polyurethane gasket to ensure maximum sealing.

Mounting plate:

Double folded and slides into position. Adjustable in depth by steps of 25 mm with the MPD02 accessory. Mounting plate is delivered attached on the outside of the enclosure packaging.

Earthing:

All panels are earthed through their fittings and are equipped with a separate earthing stud.

Finish:

240s pre-grained stainless steel (0,5 microns average).

Protection:

Corresponds with IP 56 | TYPE 4X, 12, 13 | IK 10.

Approvals:

CE, EAC, DNV-GL, GOST, Kema Keur - DEKRA, Lloyd's Register, cULus_UL Listed.

Mounting requirement:

Standard delivery ready for combined installation. For stand-alone installation add side panels.

Delivery:

Frame with fitted door, rear panel, roof panel, bottom plate, mounting plate and door frame. Delivery also includes earthing bolts. Delivered on a pallet which is identical to the width of the enclosure to allow suiting without removal. All packing material is recyclable.

Features

Feature:

Stainless steel 304 and 316(L) single door combinable floor standing enclosures, with a IP 56 protection degree.

Advantage:

A flexible solution where customers can choose enclosures that meet their size requirements, off the shelf, in order to create enclosure configurations made up of smaller individual enclosures. The installed components inside the enclosure will be safe and secure due to the high protection degree.

Benefit:

Customers can receive enclosures with a short delivery time, that match their size requirements. This will also remove any extra costs due to oversizing. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure. Stainless steel enclosures can be installed in almost any environment, grade dependent.

Comment:

Stainless steel side panels, SPMS, need to be ordered separately, to close individual enclosures and enclosure assembly's, to ensure the stated protection degree is achieved.

CAD 2D drawing (DXF) MCSS18065 6 MB
CAD 2D drawing (PDF) MCSS18065 226 KB
CAD 3D drawing (STEP) MCSS18065 43 MB
CAD drawing (EMA) MCSS18065 EPLAN 637 KB
EPLAN P8 macros (ZIP) MCSS18065 STEP 8 MB
Image (JPG 591 x 800 px) MCSS Catalogue drawing image 115 KB
Image (JPG 600 x 600 px) MCSS Product Image 108 KB
Item sheet (PDF) MCSS18065 ENGLISH 105 KB
Mounting instructions document (PDF) Floor standing stainless steel combinable 13 MB
Product sheet (PDF) MCSS(ENGLISH) 311 KB
Document (PDF) CE Declaration of Conformity 91 KB
Document (PDF) DNV-GL 368 KB
Document (PDF) GOST 209 KB
Document (PDF) Kema Keur - DEKRA 275 KB
Document (PDF) Lloyd's Register 465 KB
Document (PDF) cULus_UL Listed 669 KB
Document (PDF) IEC 61439 Declaration of Compliance 82 KB