MCSL20124R5 Floor standing, 2000x1200x400

The mild steel combinable floor standing enclosure range, MCSL, is available off the shelf in many different sizes, and is ideal for power distribution applications. The front opening can be segregated with partial panels or doors to meet power distribution system requirements. Only parts required will be delivered, which means full flexibility, lower costs, and greater procurement efficiency will be achieved.

Feature: IP 44,55 TYPE 4, 12, 13 IK 10
MCSL Product Image
Characteristics  
Height 2000 mm
Width 1200 mm
Depth 400 mm
Item no.: MCSL20124R5
EAN no.: 8713574222618
  • Technical data
  • Features
  • Downloads

Technical data

Material:

Frame: 1.5 painted steel. Rear and roof panels: 1.5 mm painted steel.

Frame:

Seam welded reversed open profiles with 25 mm hole pattern according to DIN 43660. Including integrated external hole pattern.

Rear panel:

Fitted by M6 torx screws. Standard facilities for rear door mounting.

Roof panel:

Removable.

Earthing:

All panels are earthed through their fittings and are equipped with a separate earthing stud.

Finish:

RAL 7035 structured powder coating.

Protection:

IP 44, 55, 66 | TYPE 4, 12, 13 | IK 10, depending of doors configuration.

Mounting requirement:

Standard delivery ready for combined installation. For stand-alone installation add side panels.

Delivery:

Frame, rear and roof panel. Delivery also includes earthing bolts. Delivered on a pallet with identical width of the enclosure to allow suiting without removal. All packing material is recyclable.

Features

Feature:

Mild steel combinable floor standing enclosure, available in a wide range of sizes, without a front door and bottom plates for power distribution applications.

Advantage:

A flexible solution where customers can choose enclosures that meet their size requirements, off the shelf, in order to create enclosure configurations made up of smaller individual enclosures. The enclosure's front opening can be segregated by mounting partial panels or doors to meet the requirements of the power and distribution system, for example, for a motor control centre (MCC).

Benefit:

Providing an application specific product ensures that customers costs are reduced, as the parts of the enclosure that are not required are not received, which in turn increases procurement efficiency.

Comment:

The enclosure's front opening needs to be fully covered by using specified parts, such as partial doors, DP, or partial panels, DPP, in order to achieve the stated protection degree.

CAD 2D drawing (DXF) MCSL20124R5 6 MB
CAD 2D drawing (PDF) MCSL20124R5 161 KB
CAD 3D drawing (STEP) MCSL20124R5 15 MB
Image (JPG 600 x 600 px) MCSL Product Image 32 KB
Item sheet (PDF) MCSL20124R5 ENGLISH 74 KB
Mounting instructions document (PDF) Mild steel combinable MCSL 18 MB
Product sheet (PDF) MCSL(ENGLISH) 86 KB