MCS20086HP Floor standing, 2000x800x600

The mild steel single door combinable floor standing enclosure range, MCS-HP, with a IP 66 protection degree offers a higher protection level for equipment and components which will help extend their lifetime and reduce maintenance costs when the enclosure is installed for rough environments with severe conditions.These new enclosures are rated as IP66 even if they are bayed using the standard baying brackets.

Feature: IP 66 TYPE 4, 12, 13 IK 10
MCS-HP Web Product Image
Characteristics  
Height 2000 mm
Width 800 mm
Depth 600 mm
Mounting Plate
Height
1894 mm
Mounting Plate
Width
694 mm
Max. enclosure
useful depth
559
MCS-HP Catalogue drawing image
Item no.: MCS20086HP
EAN no.: 8713574226999
  • Technical data
  • Features
  • Downloads

Technical data

Material:

Frame: 1.5 mm painted steel. Door: 2 mm painted steel. Rear, roof and side panels: 1.5 mm painted steel. Mounting plate: 3 mm galvanized steel. Bottom plates: 1 mm galvanized steel.

Frame:

Seam welded reversed open profiles with 25 mm hole pattern according to DIN 43660. Including integrated external hole pattern.

Door:

Mounted with four hinges allowing left or right hand opening.I ncluding door frame with 25 mm hole pattern.

Rear panel:

Fitted by M6 torx screws. Standard facilities for rear door mounting.

Side panels:

Supplied as an accessory.

Roof panel:

Removable.

Lock:

Espagnolette 4-point locking system. Does not interfere with the enclosure inner space. Standard double-bit lock with 3 mm insert. Standard inserts, cylinders, lift handles and T-handles are available as accessories.

Bottom plates:

One piece bottom plate with injected polyurethane gasket to ensure maximum sealing.

Mounting plate:

Double folded and slides into position. Adjustable in depth by steps of 25 mm with the MPD02 accessory. Mounting plate is delivered attached on the outside of the enclosure packaging.

Earthing:

All panels are earthed through their fittings and are equipped with a separate earthing stud.

Finish:

RAL 7035 structured powder coating.

Protection:

Complies with IP 66 | TYPE 4 12, 13 | IK 10.

Approvals:

CE, GOST, Kema Keur - DEKRA, cULus_UL Listed.

Mounting requirement:

For stand-alone installation add side panels. For combined installation HPPG01 and baying brackets, CCI and CCM, are required as accessory.

Delivery:

Frame with fitted door, rear panel, roof panel, bottom plate, mounting plate and door frame. Delivery also includes earthing bolts. Delivered on a pallet which is identical to the width of the enclosure to allow suiting without removal. All packing material is recyclable.

Features

Feature:

Mild steel single door combinable floor standing enclosure with a IP 66 protection degree.

Advantage:

A flexible solution where customers can choose enclosures that meet their size requirements, off the shelf, in order to create enclosure configurations made up of smaller individual enclosures. The installed components inside the enclosure will be safe and secure due to the high protection degree.

Benefit:

Customers can receive enclosures with a short delivery time, that match their size requirements. This will also remove any extra costs due to oversizing. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure.

Comment:

Mild steel side panels, SPM, need to be ordered separately, to close individual enclosures and enclosure assembly's, to ensure the stated protection degree is achieved. Baying gasket for IP66, HPPG01, need to be ordered separately to ensure IP 66 in bayed configuration.

CAD 2D drawing (DXF) MCS20086HP 14 MB
CAD 2D drawing (PDF) MCS20086HP 529 KB
CAD 3D drawing (STEP) MCS20086HP 58 MB
Image (JPG 566 x 800 px) MCS-HP Catalogue drawing image 62 KB
Image (JPG 600 x 600 px) MCS-HP Web Product Image 108 KB
Mounting instructions document (PDF) Combinable enclosure, high protection IP66 43 MB