MCF18105R5 Floor standing, 1800x1000x500

The mild steel flange mount disconnect floor standing enclosure range, MCF, is available off the shelf in various sizes. It is equipped with a predefined cut-out, which reduces machining time, on the right hand door, that can be matched with most of the common switches in the market. The enclosure configurations that may be created comply with door interlocking and main switch regulations.

CE Declaration of Conformity GOST Kema Keur - DEKRA IEC 61439 Declaration of Compliance
Feature: IP 55 TYPE 12, 13 IK 10.
MCF Web Product Image
Height 1800 mm
Width 1000 mm
Depth 500 mm
Mounting Plate
800 mm
MCF Catalogue drawing image
Item no.: MCF18105R5
EAN no.: 8713574129337
  • Technical data
  • Features
  • Downloads
  • Certificates

Technical data


Frame: 1.5 mm painted steel. Doors: 2 mm painted steel. Rear, roof and side panels: 1.5 mm painted steel. Mounting plate: 3 mm galvanized steel. Bottom plates: 1 mm galvanized steel.


Seam welded reversed open profiles with 25 mm hole pattern according to DIN 43660. Including integrated external hole pattern.


Mounted with four hinges. Including door frame with 25 mm hole pattern. Door can not be reversed. Flange door: Surface mounted with hinges, locked from the inside, including universal cut-out.

Rear panel:

Fitted by M6 torx screws. Standard facilities for rear door mounting.

Side panels:

Supplied as an accessory.

Roof panel:



Espagnolette 4-point locking system. Does not interfere with the enclosure inner space. Standard double-bit lock with 3 mm insert. Can be exchanged for standard inserts or Euro-cylinder and a lift handle.

Bottom plates:

Consists of three pieces.

Mounting plate:

Double folded and adjustable in depth by steps of 25 mm with the MPD02 accessory. Supplied outside of the enclosure packaging.


All panels are earthed through their fittings and are equipped with a separate earthing stud.


RAL 7035 structured powder coating.


Complies with IP 55 | TYPE 12, 13 | IK 10.


CE, EAC, GOST, Kema Keur - DEKRA.

Mounting requirement:

Standard delivery ready for combined installation. Sides of the group of combined enclosures must be closed with side panels SPM. To complete the intelocking system add FMD in this master enclosure and FMA, FMB, FMS in the slave enclosures.


Frame with fitted doors, rear panel, roof panel, bottom plates, mounting plate and door frame. For enclosures 2200 mm height, delivery includes two CMB profiles mounted in depth. Delivery also includes earthing bolts. Delivered on a pallet which is identical to the width of the enclosure to allow suiting without removal. All packing material is recyclable.



Mild steel combinable flange mount disconnect floor standing enclosure with defined universal cut-out on the right hand door as standard, in order to install a main switch handle.


A flexible solution where customers can choose enclosures that meet their size requirements, off the shelf, in order to create enclosure configurations made up of smaller individual enclosures. The predefined cut-out reduces the customers machining time and can be matched with the most common switches in the market.


Customers can receive enclosures with a short delivery time, that match their size requirements. Enclosure configurations can be created that comply with door interlocking and main switch regulations.


If the Flange Mount Disconnect enclosure is to form part of a larger enclosure configuration where the doors are required to be interlocked, accessories, FMA, FMB, FMS and FMD are required.

View and download CAD low quality   high quality
CAD 2D drawing (DXF) MCF18105R5 7 MB
CAD 2D drawing (PDF) MCF18105R5 197 KB
CAD 3D drawing (STEP) MCF18105R5 31 MB
Image (JPG 591 x 800 px) MCF Catalogue drawing image 120 KB
Image (JPG 600 x 600 px) MCF Web Product Image 79 KB
Mounting instructions document (PDF) Floor standing MCF 30 MB
Template (PDF) New locking system - Label template 108 KB
Document (PDF) CE Declaration of Conformity 62 KB
Document (PDF) GOST 514 KB
Document (PDF) Kema Keur - DEKRA 275 KB
Document (PDF) IEC 61439 Declaration of Compliance 82 KB