MCD22126PER5 Floor standing, 2200x1200x600

The mild steel double door combinable floor standing enclosure range, MCD, is ideal for installation in confined spaces where a single door, when opened, would take up too much space in front of the enclosure. The doors' loading capacity also increases as it is divided over two doors. With a IP 55 protection degree, components inside the enclosure are well protected and makes it well suited for many different applications.

CE Declaration of Conformity CSA DNV-GL EAC GOST IP Declaration of Compliance Kema Keur - DEKRA Lloyd's Register Russian Maritime Register of Shipping cULus_UL Listed IEC 61439 Declaration of Compliance
Feature: IP 55 TYPE 12, 13 IK 10
MCD Product Image
Characteristics  
Note Without mounting plate
Height 2200 mm
Width 1200 mm
Depth 600 mm
Bottom Plate Opening
Width		 1432
Bottom Plate Opening
Depth		 510
Weight (kg) 142.00
MCD Catalogue drawing image
Item no.: MCD22126PER5
EAN no.: 8713574129542
  • Technical data
  • Features
  • Downloads
  • CAD
  • Certificates

Technical data

Material:

Frame: 1.5 mm painted steel. Doors: 2 mm painted steel. Rear, roof and side panels: 1.5 mm painted steel. Mounting plate: 3 mm galvanized steel. Bottom plates: 1 mm galvanized steel.

Frame:

Seam welded reversed open profiles with 25 mm hole pattern, according to DIN 43660. Including integrated external hole pattern.

Doors:

Mounted with four hinges. Including door frame with 25 mm hole pattern. Doors cannot be reversed. Separate doors to be ordered for left hand door locking.

Rear panel:

Fitted by M6 torx screws. Standard facilities for rear doors mounting. Split rear panels in 1600 mm wide enclosures.

Side panels:

Supplied as an accessory.

Roof panel:

Removable.

Lock:

Espagnolette 4-point locking system in the main door and 2-point locking system in the slave door. Standard double-bit lock with 3 mm insert. Standard inserts, cylinders, lift handles and T-handles are available as accessories.

Bottom plates:

Consists of three or four (D>600) pieces.

Mounting plate:

Double folded and slides into position. Adjustable in depth by steps of 25 mm, with the MPD02 accessory. Supplied, attached on the outside of the enclosure packaging.

Earthing:

All panels are earthed through their fittings and equipped with a separate earthing stud.

Finish:

RAL 7035 structured powder coating.

Protection:

Complies with IP55 | TYPE 12, 13 | IK 10.

Mounting requirements:

Standard delivery ready for combined installation. For stand-alone installation add side panels.

Delivery:

Frame with fitted doors, rear panel, roof panel, bottom plates, mounting plate and door frame (not included for PER5 version). For enclosures 2200 mm height, delivery includes two CMB profiles mounted in depth. Delivery also includes earthing bolts. Delivered on a pallet which is identical to the width of the enclosure to allow baying without removal. Packing material is recyclable.

Features

Feature:

Mild steel double door combinable floor standing enclosure, with a IP 55 protection degree.

Advantage:

A flexible solution that allows customers to create enclosure configurations made up of smaller individual enclosures. The space required immediately in front of the enclosure is reduced due to the width of each enclosure door being half that of the enclosure. This also results in the door's loading capacity being higher, as it is split over two doors. The installed components inside the enclosure will be safe and secure due to the high protection degree.

Benefit:

Large enclosure configurations can be created and installed in areas where there is limited access space. The enclosure's doors can support heavy loads, such as, cooling units, due to its increased loading capability. This would provide space for the enclosure doors to support heavier components or equipment such as a cooling unit. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure.

Comment:

Mild steel side panels, SPM, need to be ordered separately, to close individual enclosures and enclosure assembly's, to ensure the stated protection degree is achieved.
General drawing (PDF) MCD General Drawing 659 KB
Image (JPG 591 x 800 px) MCD Catalogue drawing image 130 KB
Image (JPG 600 x 600 px) MCD Product Image 98 KB
Item sheet (PDF) MCD22126PER5 ENGLISH 92 KB
Mounting instructions document (PDF) Floor standing combinable and compact 60 MB
Product sheet (PDF) MCD 665 KB
Template (PDF) New locking system - Label template 133 KB

Quality:

Format:

Download
* Drawings generated according to ISO standard
Document (PDF) CE Declaration of Conformity 62 KB
Document (PDF) CSA 251 KB
Document (PDF) DNV-GL 368 KB
EAC
Document (PDF) GOST 514 KB
Document (PDF) IP Declaration of Compliance 126 KB
Document (PDF) Kema Keur - DEKRA 275 KB
Document (PDF) Lloyd's Register 629 KB
Document (PDF) Russian Maritime Register of Shipping 617 KB
Document (PDF) cULus_UL Listed 669 KB
Document (PDF) IEC 61439 Declaration of Compliance 82 KB