MCD18104R5 Floor standing, 1800x1000x400

The mild steel double door combinable floor standing enclosure range, MCD, is ideal for installation in confined spaces where a single door, when opened, would take up too much space in front of the enclosure. The doors' loading capacity also increases as it is divided over two doors. With a IP 55 protection degree, components inside the enclosure are well protected and makes it well suited for many different applications.

CE UKCA cULus_UL Listed Declaration of Compliance DNV-GL EAC GOST IEC 61439 Declaration of Compliance
Feature: IP 55 TYPE 12 IK 10
Note With mounting plate
Height 1800 mm
Width 1000 mm
Depth 400 mm
Mounting Plate
1694 mm
Mounting Plate
894 mm
Max. enclosure
useful depth
359 mm
Bottom Plate Opening
Bottom Plate Opening
Weight (kg) 136.00
MCD Catalogue drawing image
Item no.: MCD18104R5
EAN no.: 8713574129894
  • Technical data
  • Features
  • Downloads
  • CAD
  • Certificates

Technical data


Frame: 1.5 mm painted steel. Doors: 2 mm painted steel. Rear, roof and side panels: 1.5 mm painted steel. Mounting plate: 3 mm galvanized steel. Bottom plates: 1 mm galvanized steel.


Seam welded reversed open profiles with 25 mm hole pattern, according to DIN 43660. Including integrated external hole pattern.


Mounted with four hinges. Including door frame with 25 mm hole pattern. Doors cannot be reversed. Separate doors to be ordered for left hand door locking.

Rear panel:

Fitted by M6 torx screws. Standard facilities for rear doors mounting. Split rear panels in 1600 mm wide enclosures.

Side panels:

Supplied as an accessory.

Roof panel:



Espagnolette 4-point locking system in the main door and 2-point locking system in the slave door. Standard double-bit lock with 3 mm insert. Standard inserts, cylinders, lift handles and T-handles are available as accessories.

Bottom plates:

Consists of three or four (D>600) pieces.

Mounting plate:

Double folded and slides into position. Adjustable in depth by steps of 25 mm, with the MPD02 accessory. Supplied, attached on the outside of the enclosure packaging.


All panels are earthed through their fittings and equipped with a separate earthing stud.


RAL 7035 structured powder coating.


Complies with IP55 | TYPE 12 | IK 10.

Mounting requirements:

Standard delivery ready for combined installation. For stand-alone installation add side panels.


Frame with fitted doors, rear panel, roof panel, bottom plates, mounting plate and door frame (not included for PER5 version). For enclosures 2200 mm height, delivery includes two CMB profiles mounted in depth. Delivery also includes earthing bolts. Delivered on a pallet which is identical to the width of the enclosure to allow baying without removal. Packing material is recyclable.



Mild steel double door combinable floor standing enclosure, with a IP 55 protection degree.


A flexible solution that allows customers to create enclosure configurations made up of smaller individual enclosures. The space required immediately in front of the enclosure is reduced due to the width of each enclosure door being half that of the enclosure. This also results in the door's loading capacity being higher, as it is split over two doors. The installed components inside the enclosure will be safe and secure due to the high protection degree.


Large enclosure configurations can be created and installed in areas where there is limited access space. The enclosure's doors can support heavy loads, such as, cooling units, due to its increased loading capability. This would provide space for the enclosure doors to support heavier components or equipment such as a cooling unit. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure.


Mild steel side panels, SPM, need to be ordered separately, to close individual enclosures and enclosure assembly's, to ensure the stated protection degree is achieved.

Certificate (PDF) Declaration of conformity - ISO: 6270 & 9227 159 KB
General drawing (PDF) MCD General Drawing 659 KB
Image (JPG 800 x 800 px) MCD 40 KB
Image (JPG 591 x 800 px) MCD Catalogue drawing image 66 KB
Item sheet (PDF) MCD18104R5 ENGLISH 451 KB
Mounting instructions document (PDF) Floor standing combinable and compact 22 MB
Product sheet (PDF) MCD(ENGLISH) 1 MB
Template (PDF) New locking system - Label template 117 KB



* Drawings generated according to ISO standard
Document (PDF) CE UKCA 100 KB
Document (PDF) cULus_UL Listed 669 KB
Document (PDF) Declaration of Compliance 77 KB
Document (PDF) DNV-GL 368 KB
Document (PDF) EAC 2 MB
Document (PDF) GOST 7 MB
Document (PDF) IEC 61439 Declaration of Compliance 102 KB