MASE0606021R5 Wall mounted EMC, 600x600x210

The galvanised steel single door wall mounted enclosure range, MASE, is designed to meet EMC requirements. An excellent Faraday effect is created, since electrical conductivity between the enclosure body an door is guaranteed. The risk for component failure, and with that unnecessary downtime, is eliminated as electromagnetic interference is avoided and water and dust are prevented from entering the enclosure. This enclosure range is well suited for applications where EMC is required.

CE Declaration of Conformity GOST cULus_UL Listed
Feature: IP 54 TYPE 12 IK 10
MASE Product Image
Characteristics  
Height 600 mm
Width 600 mm
Depth 210 mm
Mounting Plate
Height
570 mm
Mounting Plate
Width
550 mm
Max. enclosure
useful depth
192
No Locks 2
Weight (kg) 21.00
MASE Catalogue drawing image
Item no.: MASE0606021R5
EAN no.: 8713574128620
  • Technical data
  • Features
  • Downloads
  • Certificates

Technical data

Material:

Body: 1.2 mm zinc plated steel / 1.4 mm MASE0606021R5 and above. Door: 1.2 mm zinc plated steel / 1.4 mm MASE0606021R5 and above / 1.8 mm MASE1006026R5 and above. Mounting plate: 2 mm galvanized steel.

Body:

Folded and seam welded. Four 8.5 mm diameter holes for wall fi xing, pressed out in 20.4 mm diameter x 2 mm depressions to allow air circulation around the rear part of the enclosure.

Door:

Surface mounted with 130º opening. Concealed removable hinges with captive pin. Hinges are mounted for right hand opening only. From size MASE0505021R5 and above there are two removable mounting profiles on the door. Sealing is ensured by a conductive EMC gasket.

Lock:

Chrome plated double-bit lock with 3 mm insert and 90º movement. 1000 mm high enclosures and above have espagnolette three point locking system.

Mounting plate:

The mounting plate is marked vertically at 10 mm intervals for easy horizontal positioning of equipment. On the top and bottom are holes to facilitate cable fi xing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides from 800 mm and above are strengthened by folded edges. By using the AMG accessory the mounting plate can be adjusted to any depth.

Gland Plate Opening:

No gland plate opening for a maximum EMI protection.

Earthing:

The door is earthed by means of a separate earthing stud M8.

Finish:

RAL 7035 structure powder coating on the outside only.

Protection:

IP 54 | TYPE 12 | IK 10.

Approvals:

CE, GOST, cULus_UL Listed.

Delivery:

Zinc plated enclosure body and door, painted on the outside. Door equipped with EMI conductive gasket. Two door mounting profi les from size MASE0505021R5 and above. Earthing facilities.

Features

Feature:

Galvanised steel single door wall mounted enclosure, designed to EMC requirements.

Advantage:

Electric conductivity between the enclosure's body and door is guaranteed, which ensures a good Faraday effect is created.

Benefit:

Component and equipment failure, and unnecessary downtime is avoided as the components are protected from electromagnetic interferences as well as from water and dust entering the enclosure.

Comment:

Only EMC rated accessories or peripherals that affect the enclosure's external walls should be used, using other accessories or peripherals will downgrade the enclosure's EMC performance.

View and download CAD low quality   high quality
CAD 2D drawing (DXF) MASE0606021R5 1 MB
CAD 2D drawing (PDF) MASE0606021R5 89 KB
CAD 3D drawing (STEP) MASE0606021R5 4 MB
Image (JPG 800 x 730 px) MASE Catalogue drawing image 254 KB
Image (JPG 600 x 600 px) MASE Product Image 176 KB
Item sheet (PDF) MASE0606021R5 ENGLISH 244 KB
Mounting instructions document (PDF) Floor standing MASE 156 KB
Product sheet (PDF) MASE(ENGLISH) 1 MB
Document (PDF) CE Declaration of Conformity 62 KB
Document (PDF) GOST 209 KB
Document (PDF) cULus_UL Listed 669 KB