MAP0312030R5 Wall mounted, 300x1200x300

The mild steel single door wall mounted range, MAP, with a IP 66 protection degree, comprises enclosures with a horizontally hinged door plus top and bottom gland plate openings. Each of these enclosures can be easily combined with another wall mounted enclosure, which allows for the creation of configurations with two compartments with individual access. Water and dust are prevented from entering the enclosure, thus eliminating the risk for component failure, and with that, unnecessary downtime.

CE Declaration of Conformity CSA GOST Kema Keur - DEKRA Lloyd's Register cULus_UL Listed IEC 61439 Declaration of Compliance
Feature: IP 66 TYPE 4, 12, 13 IK 10
MAP Product Image
Characteristics  
Note With mounting plate
Height 300 mm
Width 1200 mm
Depth 300 mm
Mounting Plate
Height
270 mm
Mounting Plate
Width
1150 mm
Max. enclosure
useful depth
282
Gland Plate
Opening Size
510 × 96
Type 4
No. of Gland Plate
Openings
2 + 2
No Locks 2
Weight (kg) 4.90
MAP Catalogue drawing image
Item no.: MAP0312030R5
EAN no.: 8713574123861
  • Technical data
  • Features
  • Downloads
  • Certificates

Technical data

Material:

Body: 1.5 mm mild steel. Gland plate: 1.4 mm mild steel. Door: 1.5 mm mild steel MAP0306030R5 / 2 mm MAP0308030R5 and above. Mounting plate: 2 mm galvanized steel.

Body:

Folded and seam welded. Four 8.5 mm diameter holes for wall fixing pressed out in 20.4 mm diameter x 2 mm depressions to allow air circulation around the rear part of the enclosure.

Front panel:

Surface mounted with 130° opening. Concealed removable hinges with captive pin. Hinges can be mounted to allow top or bottom opening. Mechanical door stop keeps the panel open. One removable mounting profile on the hinge side. Sealing is ensured by an extruded one piece polyurethane gasket.

Lock:

Customised lock with double-bit for easy opening of the panel. Double-bit 3 mm insert and 90° movement. Other inserts are available as an accessory.

Mounting plate:

The mounting plate is marked vertically at 10 mm intervals for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides from 800 mm and above are strengthened by folded edges.

Gland Plate Opening:

In top and bottom. Situated at the far rear of the enclosure to make cabling onto the mounting plate easier. Gland plates (AF) and gaskets (AG) are not included. If the MAP panel is to be combined to an MAS or MAD enclosure, then the gland plate from the MAS/MAD enclosure can be used with the MAP panel.

Protection:

Mounted stand alone complies with IP 66 | TYPE 4, 12, 13 | IK 10, as long as you mount the gland plate(s) and gasket(s), supplied as an accessory. Combined with MAS or MAD complies with IP 55 | TYPE 12.

Approvals:

CE, CSA, GOST, Kema Keur - DEKRA, Lloyd's Register, cULus_listed.

Finish:

RAL 7035 structured powder coating.

Delivery:

Enclosure with panel and one panel mounting profile. Plastic double-bit 3 mm key and mounting accessories. Earthing facilities.

Features

Feature:

Mild steel wall mounted enclosure with a horizontally hinged panel door, top and bottom gland plate openings, providing a high IP 66 protection degree once covered.

Advantage:

The enclosure can easily be combined with another single or double door wall mounted enclosure if further installation space is required, maintaining internal communication. The installed components inside the enclosure will be safe and secure due to the high protection degree.

Benefit:

Combining enclosures allow customers to create enclosure configurations made up of two compartments with individual access. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure.

Comment:

If the enclosure is to be used standalone, and not combined to another, then two or four gland plates, depending on the enclosure's size, will need to be ordered separately in order to achieve the stated protection degree.

View and download CAD low quality   high quality
CAD 2D drawing (DXF) MAP0312030R5 3 MB
CAD 2D drawing (PDF) MAP0312030R5 461 KB
CAD 3D drawing (STEP) MAP0312030R5 8 MB
CAD drawing (EMA) MAP0312030R5 EPLAN 207 KB
Image (JPG 800 x 636 px) MAP Catalogue drawing image 109 KB
Image (JPG 600 x 600 px) MAP Product Image 180 KB
Item sheet (PDF) MAP0312030R5 ENGLISH 358 KB
Mounting instructions document (PDF) Wall mounted MAP 167 KB
Product sheet (PDF) MAP 182 KB
Document (PDF) CE Declaration of Conformity 62 KB
Document (PDF) CSA 251 KB
Document (PDF) GOST 209 KB
Document (PDF) Kema Keur - DEKRA 275 KB
Document (PDF) Lloyd's Register 487 KB
Document (PDF) cULus_UL Listed 427 KB
Document (PDF) IEC 61439 Declaration of Compliance 93 KB