MAD1201030R5 Wall mounted, 1200x1000x300

The mild steel double door wall mounted enclosure range, MAD, is ideal for installation in confined spaces where a single door, when opened, would take up too much space in front of the enclosure. The doors' loading capacity also increases as it is divided over two doors. With a IP 55 protection degree, components inside the enclosure are well protected and makes it well suited for many different applications.

CE Declaration of Conformity CSA DNV-GL GOST Kema Keur - DEKRA Lloyd's Register Russian Maritime Register of Shipping cULus_UL Listed IEC 61439 Declaration of Compliance
Feature: IP 55 TYPE 12, 13 IK 10
MAD Product Image
Characteristics  
Note With mounting plate
Height 1200 mm
Width 1000 mm
Depth 300 mm
Mounting Plate
Height
1170 mm
Mounting Plate
Width
950 mm
Max. enclosure
useful depth
282
Gland Plate
Opening Size
410 × 96
Type 3
No. of Gland Plate
Openings
2
No Locks 1*
Weight (kg) 78.85
MAD Catalogue drawing image
Item no.: MAD1201030R5
EAN no.: 8713574123588
  • Technical data
  • Features
  • Downloads
  • Certificates

Technical data

Material:

Body: 1.5 mm mild steel. Gland plate: 1.4 mm mild steel. Door: 2 mm mild steel Mounting plate: 2 mm galvanized steel / 2.5 mm MAD1001030R5 and above.

Body:

Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter x 2 mm depressions to allow air circulation around the rear part of the enclosure.

Door:

Surface mounted with 130° opening. Concealed removable hinges with captive pin. Two removable mounting profiles in the right hand door. Sealing is ensured by an extruded one piece polyurethane gasket.

Lock:

Customised lock with double-bit for easy opening of the door, double-bit 3 mm insert and 90° movement. Espagnolette three point locking. Other inserts are available as an accessory.

Mounting plate:

The mounting plate is marked vertically at 10 mm intervals for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides from 800 mm and above are strengthened by folded edges. By using the AMG accessory the mounting plate position can be adjusted to any depth.

Gland Plate Opening:

Situated at the far rear of the enclosure to make cabling onto the mounting plate easier.

Protection:

IP 55 | TYPE 12, 13 | IK 10. For outdoor installation the use of a rain hood ARF and 100% polyester paint coating is recommended. The corrosion resistance must be taken into consideration.

Approvals:

CE, CSA, DNV-GL, GOST, Kema Keur - DEKRA, Lloyd's Register, RS, cULus_UL Listed.

Finish:

RAL 7035 structured powder coating.

Delivery:

Enclosure with doors, and two door mounting profiles on the right door. Gland plate(s) with gasket(s), metallic DIN 3 mm key, and mounting accessories. Earthing facilities.

Features

Feature:

Mild steel double door wall mounted enclosure, with a IP 55 protection degree.

Advantage:

The space required immediately in front of the enclosure is reduced due to the width of each enclosure door being half that of the enclosure. This also results in the door's loading capacity being higher, as it is split over two doors. The installed components inside the enclosure will be safe and secure due to the high protection degree.

Benefit:

Large enclosures can be installed in areas where there is limited access space. The enclosure's doors can support heavy loads, such as, cooling units, due to its increased loading capability. This would provide space for the enclosure door's to support heavier components or equipment such as a cooling unit. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure.

Comment:

The protection degree of double door enclosures is reduced from IP 66 to 55.

View and download CAD low quality   high quality
CAD 2D drawing (DXF) MAD1201030R5 5 MB
CAD 2D drawing (PDF) MAD1201030R5 244 KB
CAD 3D drawing (STEP) MAD1201030R5 12 MB
CAD drawing (EMA) MAD1201030R5 EPLAN 142 KB
Image (JPG 620 x 800 px) MAD Catalogue drawing image 75 KB
Image (JPG 600 x 600 px) MAD Product Image 68 KB
Item sheet (PDF) MAD1201030R5 ENGLISH 396 KB
Mounting instructions document (PDF) Wall mounted MAD 341 KB
Product sheet (PDF) MAD(ENGLISH) 553 KB
Document (PDF) CE Declaration of Conformity 62 KB
Document (PDF) CSA 251 KB
Document (PDF) DNV-GL 345 KB
Document (PDF) GOST 514 KB
Document (PDF) Kema Keur - DEKRA 275 KB
Document (PDF) Lloyd's Register 487 KB
Document (PDF) Russian Maritime Register of Shipping 617 KB
Document (PDF) cULus_UL Listed 669 KB
Document (PDF) IEC 61439 Declaration of Compliance 82 KB