MAD0801230R5 Wall mounted, 800x1200x300

The mild steel double door wall mounted enclosure range, MAD, is ideal for installation in confined spaces where a single door, when opened, would take up too much space in front of the enclosure. The doors' loading capacity also increases as it is divided over two doors. With a IP 55 protection degree, components inside the enclosure are well protected and makes it well suited for many different applications.

CE Declaration of Conformity DNV-GL GOST IP Declaration of Compliance Kema Keur - DEKRA Lloyd's Register Russian Maritime Register of Shipping cULus_UL Listed IEC 61439 Declaration of Compliance
Feature: IP 55 TYPE 12 IK 10
MAD Product Image
Note With mounting plate
Height 800 mm
Width 1200 mm
Depth 300 mm
Mounting Plate
770 mm
Mounting Plate
1150 mm
Max. enclosure
useful depth
282 mm
Gland Plate
Opening Size
510 × 96 mm
Type 4
No. of Gland Plate
No Locks 1*
Weight (kg) 60.00
MAD Catalogue drawing image
Item no.: MAD0801230R5
EAN no.: 8713574123540
  • Technical data
  • Features
  • Downloads
  • CAD
  • Certificates

Technical data


Body: 1.5 mm mild steel. Gland plate: 1.4 mm mild steel. Door: 2 mm mild steel Mounting plate: 2 mm galvanized steel / 2.5 mm MAD1001030R5 and above.


Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter × 2 mm depressions, to allow air circulation around the rear part of the enclosure.


Surface mounted with 130° opening. Concealed removable hinges with captive pin. Inner M6 welded studs to mount door profiles MMDP. Two removable mounting profiles on the right hand door and two on the left hand door. Sealing is ensured by an injected one piece polyurethane gasket.


Customized lock with double-bit for easy opening of the door. Double-bit 3 mm insert and 90° movement. Espagnolette three point locking. Other inserts are available as an accessory.

Mounting plate:

The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides, from 800 mm and above, are strengthened by folded edges. By using the AMG accessory, the mounting plate position can be adjusted to any depth.

Gland Plate Opening:

Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier.


IP 55 | TYPE 12 | IK 10. For outdoor installation, the use of a rain hood ARF and 100% polyester paint coating is recommended. The corrosion resistance must be taken into consideration.


RAL 7035 structured powder coating.


Enclosure with doors, and two door mounting profiles on the right door. Gland plate(s) with gasket(s), metallic double-bit 3 mm key, and mounting accessories. Earthing facilities.



Mild steel double door wall mounted enclosure, with a IP 55 protection degree.


The space required immediately in front of the enclosure is reduced due to the width of each enclosure door being half that of the enclosure. This also results in the door's loading capacity being higher, as it is split over two doors. The installed components inside the enclosure will be safe and secure due to the high protection degree.


Large enclosures can be installed in areas where there is limited access space. The enclosure's doors can support heavy loads, such as, cooling units, due to its increased loading capability. This would provide space for the enclosure door's to support heavier components or equipment such as a cooling unit. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure.


The protection degree of double door enclosures is reduced from IP 66 to 55.

Certificate (PDF) Declaration of conformity - ISO: 6270 & 9227 241 KB
General drawing (PDF) MAD General Drawing 288 KB
Image (JPG 620 x 800 px) MAD Catalogue drawing image 52 KB
Image (JPG 600 x 600 px) MAD Product Image 37 KB
Item sheet (PDF) MAD0801230R5 ENGLISH 487 KB
Mounting instructions document (PDF) Wall mounted MAD 1 MB
Product sheet (PDF) MAD-I(RUSSIAN) 553 KB



* Drawings generated according to ISO standard
Document (PDF) CE Declaration of Conformity 347 KB
Document (PDF) DNV-GL 345 KB
Document (PDF) GOST 7 MB
Document (PDF) IP Declaration of Compliance 350 KB
Document (PDF) Kema Keur - DEKRA 275 KB
Document (PDF) Lloyd's Register 640 KB
Document (PDF) Russian Maritime Register of Shipping 617 KB
Document (PDF) cULus_UL Listed 669 KB
Document (PDF) IEC 61439 Declaration of Compliance 102 KB