EXE906021SS61E Wall mounted Ex, 900x600x210

The stainless steel single-door wall mounted enclosure, range EXE, with ATEX and IECEx certifications, is available off the shelf in 16 different sizes that accommodate the majority of common applications. ZONEX enclosures deliver a robust solution for termination and junction enclosure applications in potentially hazardous locations, including petroleum and chemical processing, water treatment processing, pharmaceutical processing, and grain processing. ZONEX enclosures are designed and certified to meet ATEX Directive 2014/34/EU, as well as IECEx standards for increased safety in housing electrical components in Zone 1 and Zone 2 applications.

ATEX CE Declaration of Conformity Declaration of Compliance IECEx cULus_UL Listed
Feature: Ex eb IIC Gb; Ex tb IIIC Db; IP 66 TYPE 4, 4X, 12
EXE-WM
Characteristics  
Height 900 mm
Width 600 mm
Depth 210 mm
Gland plate opening width 537 mm
Gland plate opening depth 134 mm
Mounting Plate Height 855 mm
Mounting Plate Width 555 mm
Max. enclosure useful depth 160 mm
No Locks 2
EXE-WM Catalogue Drawing
Item no.: EXE906021SS61E
EAN no.: 8713574246928
  • Technical data
  • Features
  • Downloads
  • Certificates

Technical data

Material:

Fabricated from Type 316L stainless steel. Body: 1.5 mm / 2.0 mm for enclosures with a height of 600 mm or above. Door: 1.5 mm / 2.0 mm for enclosures with a height of 600 mm or above. Gland plate: 2.5 mm. Mounting plate: 2.0 mm galvanized steel.

Body:

M10 brass internal/external bonding provision. 2.5 mm thick wall-mounting brackets welded on the rear. M5 threads for gland plate screws provide quick and easy installation.

Door:

Continuous seal polyurethane gasket, operating range -40 to +70 ºC. Door opening 210º. Door is easily removed by pulling clip-style hinge pins. M6 inner grounding stud. Optional silicone gasket with operating range -55 to +180 ºC.

Lock:

Type 316L stainless steel quarter-turn latch with double bit 3 mm insert.

Mounting plate:

Fixed onto M8 welded studs to the rear of the enclosure. Holes to facilitate cable fixing are on the top and bottom.

Cable access:

Fabricated and formed M5 threads for gland plate screws provide quick and easy installation. Flat gasketed.

Protection:

IP 66 | TYPE 4, 4X, 12.

Finish:

320 grain brushed finish.

Approvals:

ATEX Directive 2014/34/EU. ATEX: Sira 09ATEX3224U; 2813 Ex II 2 G D; Ex e IIC Gb; Ex tb IIIC Db IP 66; EN 60079-0; EN 60079-7; EN 60079-31. IECEx: IECEx SIR 09.0099U; Ex eb IIC Gb; Ex tb IIIC Db IP 66; IEC 60079-0; IEC 60079-7; IEC 60079-31.

Delivery:

Enclosure with door, mounting plate, gland plate and mounting accessories.

Note:

nVent HOFFMAN ATEX Ex e enclosures are not intended for use in explosion-proof or flame-proof applications.

Features

Feature:

ATEX- and IECEx-certified enclosure.

Advantage:

Certification of final assembly is easier if enclosures are certified.

Benefit:

Time and cost savings in the end-use investigation process of the final assembly.

Image (JPG 800 x 800 px) EXE-WM 62 KB
Image (JPG 800 x 485 px) EXE-WM Catalogue Drawing 54 KB
Item sheet (PDF) EXE906021SS61E ENGLISH 163 KB
Manual (PDF) EXE WM User Manual 303 KB
Mounting instructions document (PDF) EXE WM INSTALLATION 1 MB
Product sheet (PDF) EXE-WM(RUSSIAN) 422 KB
ATEX
Document (PDF) CE Declaration of Conformity 92 KB
Document (PDF) Declaration of Compliance 77 KB
IECEx
Document (PDF) cULus_UL Listed 266 KB