EXE26016090 Terminal box Ex, 260x160x90

ZONEX polyester terminal boxes are ideal for field terminations in hazardous locations. Thanks to the high-temperature silicone gasket and stainless steel screws, it can be used to protect equipment and terminations from corrosive contaminants, while meeting rigorous demands. The enclosures meets ATEX Directives 2014/34/EU and IECEx standards for increased safety in housing electrical components in Zone 1 and Zone 2 applications.

CE Declaration of Conformity Declaration of Compliance
Feature: Ex eb IIC Gb; Ex tb IIIC Db; IP 66 TYPE 4, 4X, 12
Height 160 mm
Width 260 mm
Depth 90 mm
Item no.: EXE26016090
EAN no.: 8713574248069
  • Technical data
  • Features
  • Downloads
  • Certificates

Technical data


Polyester terminal box for increased safety Ex e applications. Compression-moulded glass fibre reinforced polyester with added agents to address static charge build-up. Internal M4 or M6 stainless steel inserts for DIN- and panel-mounting. Mounting location dimensions are moulded into the back side of the enclosure. Covered mounting screw provisions outside of gasketed area.


Body and cover: Compression-moulded, high-impact strength, glass fibre reinforced polyester. Screws: Stainless steel.


Retained, continuous, high-temperature silicone gasket within a labyrinth seal between cover and body.

Operating temperature:

-50 to +100 °C


UL 94 V-0.


IP 66 | TYPE 4, 4X, 12


Moulded material has a smooth, low-gloss, black finish RAL 9005.


ATEX DIRECTIVE 2014/34/EU; ATEX; TUV 13 ATEX120808U; Ex eb IIC Gb; Ex tb IIIC Db IP 66; EN60079-0; EN60079-7; EN60079-31; Service temperature -50 to +100 °C; IECEx; IECEx TUV 13.0001U; Ex eb IIC Gb; Ex tb IIIC Db IP 66; IEC 60079-0; IEC 60079-7; IEC 60079-31; Service temperature -50 to +100 °C


Body, door and cover screws.


This is not an explosion-proof enclosure. Mounting plate available separately.



ATEX- and IECEx-certified enclosure polyester terminal box, available in a wide range of sizes, with a high IP 66 protection degree.


Time and cost savings in the end-use investigation process of the final assembly.


Certification of final assembly is easier if enclosures are certified.

Dxf (DXF) EXE26016090 493 KB
Image (JPG 800 x 800 px) EXE-NB 25 KB
Item sheet (PDF) EXE26016090 ENGLISH 245 KB
Mounting instructions document (PDF) 89100759 590 KB
Product sheet (PDF) EXE-NB 284 KB
Product sheet (PDF) EXE-NB(RUSSIAN) 110 KB
Step (STEP) exe26016090 1 MB
Document (PDF) CE Declaration of Conformity 91 KB
Document (PDF) Declaration of Compliance 77 KB