EKSS16104 Floor standing, 1600x1000x400

The stainless steel single door compact floor standing enclosure range, EKSS, with a IP 66 protection degree, is available off the shelf in many different sizes. The risk for component failure, and with that unnecessary downtime, is eliminated as water and dust are prevented from entering the enclosure. This enclosure range is well suited for almost any environment, grade dependent.

CE Declaration of Conformity EAC GOST IP Declaration of Compliance Kema Keur - DEKRA Lloyd's Register cULus_UL Listed IEC 61439 Declaration of Compliance
Feature: IP 66 TYPE 4X, 12 IK 10
EKSS Product Image
Height 1600 mm
Width 1000 mm
Depth 400 mm
Mounting Plate
1494 mm
Mounting Plate
894 mm
Weight (kg) 123.00
EKSS Catalogue drawing image
Item no.: EKSS16104
EAN no.: 8713574191884
  • Technical data
  • Features
  • Downloads
  • CAD
  • Certificates

Technical data


AISI 304 pre-grained stainless steel / AISI 316L. Body and removable rear panel: 1.5 mm. Door: 2 mm. Bottom plate: 1.5 mm. Mounting plate: 3 mm galvanized steel.


One piece enclosure body. Integrated depth profiles with hole pattern, allowing mounting plate adjustable in depth.


Surface mounted with 4 hinges allowing left or right hand opening. Including door frame with 25 mm hole pattern and earthing studs.

Rear panel:

Fitted by M6 torx screws. Standard facilities for rear door mounting.


External espagnolette 4-point locking system. Standard fitted double-bit 3 mm insert. Standard inserts, cylinders, lift handles and T-handles are available as accessories.

Bottom plates:

One piece bottom plate, with injected polyurethane gasket to ensure maximum sealing.

Mounting plate:

Double folded and slides into position. Adjustable in depth by steps of 25 mm with the MPD02 accessory. Mounting plate is supplied, attached on the outside of the enclosure packaging.


Door is equipped with separate welded earthing studs and earthing to the frame can be accomplished by using the ECF.


400 pre-grained stainless steel.


Complies with IP 66 | TYPE 4X, 12 | IK 10.


One piece body with fitted door, bottom plate and mounting plate, including door earthing studs. Delivered on a pallet which is identical to the width of the enclosure. Mounting plate is attached to the outside of the enclosure packaging. All the packing material is recyclable.



Stainless steel 304 and 316(L) single door compact floor standing enclosures, available in a wide range of sizes, with a high IP 66 protection degree.


Customers can choose enclosures that meet their size requirements, off the shelf. The installed components inside the enclosure will be safe and secure due to the high protection degree.


Customers can receive enclosures with a short delivery time, that match their size requirements. This will also remove any extra costs due to oversizing. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure. Stainless steel enclosures can be installed in almost any environment, grade dependent.

General drawing (PDF) EKSS General Drawing 134 KB
Image (JPG 591 x 800 px) EKSS Catalogue drawing image 106 KB
Image (JPG 800 x 800 px) EKSS Product Image 46 KB
Item sheet (PDF) EKSS16104 ENGLISH 317 KB
Mounting instructions document (PDF) Floor Standing Compact Stainless Steel 13 MB
Product sheet (PDF) EKSS(RUSSIAN) 1 MB



* Drawings generated according to ISO standard
Document (PDF) CE Declaration of Conformity 101 KB
Document (PDF) GOST 7 MB
Document (PDF) IP Declaration of Compliance 256 KB
Document (PDF) Kema Keur - DEKRA 227 KB
Document (PDF) Lloyd's Register 629 KB
Document (PDF) cULus_UL Listed 669 KB
Document (PDF) IEC 61439 Declaration of Compliance 102 KB