CED50 Double protection gland M50

The rubber cable gland is easy to mount, and, cables and pipes can be pulled through easily without tools, ensuring that the enclosure's protection degree is maintained.

CED Product Image
Characteristics  
Height 34.8 mm
H1 25.0
Metric M50
Diameter 60.5
Cable diameter (mm) 27-35
Hole diameter (mm) 50.5
Pack quantity 10
CED Catalogue drawing image
Item no.: CED50
EAN no.: 8713574187368
  • Technical data
  • Features
  • Downloads

Technical data

Description:

The rubber grommet is very simple to use. The installation does not require tools, which in turn means lower work cost. The “pushout” membrane is a permanent seal until it is penetrated by a cable or pipe. Suitable for holes in materials of 0.5 to 4 mm thickness.

Material:

EPDM, halogen free.

Temperature resistance:

-40ºC to +110ºC.

Finish:

RAL 7035.

Protection:

IP 67.

Features

Feature:

Thermoplastic elastomer cable gland with a double layer sock surrounding the cable.

Advantage:

The protection degree is based on an exterior and interior layer that work independently.

Benefit:

The protection degree is maintained if the outside layer fails due to damage or external circumstances.  

Comment:

The double layer sock is the optimal solution if the outside layer is exposed to external circumstances such as high pressure water. A potential disadvantage of the double layer however is that cables only pass through straight. A single layer sock is available (CES) to allow cable passing through with an angle but the protection degree might be at risk if this single layer fails.

CAD 2D drawing (DXF) CED50 56 KB
CAD 2D drawing (PDF) CED50 186 KB
CAD 3D drawing (STEP) CED50 126 KB
Image (JPG 800 x 518 px) CED Catalogue drawing image 46 KB
Image (JPG 600 x 600 px) CED Product Image 77 KB
Item sheet (PDF) CED50 ENGLISH 71 KB
Mounting instructions document (PDF) Wall mounted CED 320 KB
Product sheet (PDF) CED(ENGLISH) 71 KB