CED12 Double protection gland M12

The rubber cable gland is easy to mount, and, cables and pipes can be pulled through easily without tools, ensuring that the enclosure's protection degree is maintained.

CED Product Image
Height 12.8 mm
H1 5.6
Metric M12
Diameter 20.0
Cable diameter (mm) 4-7
Hole diameter (mm) 12.5
Pack quantity 50
CED Catalogue drawing image
Item no.: CED12
EAN no.: 8713574187306
  • Technical data
  • Features
  • Downloads

Technical data


The rubber grommet is very simple to use. The installation does not require tools, which in turn means lower work cost. The “pushout” membrane is a permanent seal until it is penetrated by a cable or pipe. Suitable for holes in materials of 0.5 to 4 mm thickness.


EPDM, halogen free.

Temperature resistance:

-40ºC to +110ºC.


RAL 7035.


IP 67.



Thermoplastic elastomer cable gland with a double layer sock surrounding the cable.


The protection degree is based on an exterior and interior layer that work independently.


The protection degree is maintained if the outside layer fails due to damage or external circumstances.  


The double layer sock is the optimal solution if the outside layer is exposed to external circumstances such as high pressure water. A potential disadvantage of the double layer however is that cables only pass through straight. A single layer sock is available (CES) to allow cable passing through with an angle but the protection degree might be at risk if this single layer fails.

CAD 2D drawing (DXF) CED12 40 KB
CAD 2D drawing (PDF) CED12 191 KB
CAD 3D drawing (STEP) CED12 113 KB
Image (JPG 800 x 518 px) CED Catalogue drawing image 46 KB
Image (JPG 600 x 600 px) CED Product Image 77 KB
Item sheet (PDF) CED12 ENGLISH 71 KB
Mounting instructions document (PDF) Wall mounted CED 320 KB