ASR1208040OG Wall mounted, 1200x800x400

The stainless steel single door wall mounted enclosure range, ASR-OG, with a IP 66 protection degree, is available off the shelf in four different sizes that accommodate majority of common applications. The risk for component failure, and with that unnecessary downtime is eliminated, as water and dust are prevented from entering the enclosure. This enclosure range is well suited for installation of industrial equipment in environments exposed to corrosive process chemicals, including chloride, marine applications subject to saltwater spray, and coastal areas.

CE Declaration of Conformity DNV-GL GOST Lloyd's Register Russian Maritime Register of Shipping IEC 61439 Declaration of Compliance
Feature: IP 66 TYPE 4X, 12, 13 IK 10
ASR Product Image
Note With mounting plate
Height 1200 mm
Width 800 mm
Depth 400 mm
Mounting Plate
750 mm
Mounting Plate
1170 mm
Max. enclosure
useful depth
382 mm
Gland Plate
Opening Size
539 × 147 mm
ASR_OG Catalogue drawing image
Item no.: ASR1208040OG
EAN no.: 8713574227743
  • Technical data
  • Downloads
  • CAD
  • Certificates

Technical data


AISI 316L pre-grained stainless steel. Body: 2 mm. Door: 2 mm. Gland plate: 2 mm Mounting plate: 2mm galvanized steel.


Folded and seam welded with wall mounting brackets welded on the rear.


Corner formed in one piece. Surface mounted with 130° opening. Concealed AISI 316L stainless steel hinges with captive pin. Can be mounted to give left or right hand opening. Sealing is ensured by an injected one piece polyurethane gasket. Welded studs M6x13 for fixing the door profiles and drawing pocket.


With T-Handle lock with key 333 in Stainlees Steel 316L, and espagnolette three point locking in Stainless Steel 316.

Mounting plate:

The mounting plate is marked vertically at 10 mm intervals for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides from 800 mm and above are strengthened by folded edges. By using the AMG accessory the mounting plate position can be adjusted to any depth.

Cable access:

With gland plate in the bottom to make cabling onto the mounting plate easier.


Corresponds with IP66 I TYPE 4x, 12, 13 I IK 10.


240s pre grained stainless steel (average 0,5 micron).


CE, DNV-GL, GOST, Lloyd's Register, RS.


Enclosure with door, mounting plate, gland plate and mounting accessories.

Image (JPG 600 x 600 px) ASR Product Image 95 KB
Image (JPG 742 x 800 px) ASR_OG Catalogue drawing image 80 KB
Item sheet (PDF) ASR1208040OG ENGLISH 296 KB
Mounting instructions document (PDF) Wall mounted ASR 122 KB
CAD 2D drawing (DXF) ASR1208040OG 4 MB
CAD 2D drawing (PDF) ASR1208040OG 125 KB
CAD 3D drawing (STEP) ASR1208040OG 10 MB
Document (PDF) CE Declaration of Conformity 219 KB
Document (PDF) DNV-GL 344 KB
Document (PDF) GOST 514 KB
Document (PDF) Lloyd's Register 487 KB
Document (PDF) Russian Maritime Register of Shipping 617 KB
Document (PDF) IEC 61439 Declaration of Compliance 82 KB