ASR0806021 Wall mounted, 800x600x210

The stainless steel single door wall mounted enclosure range, ASR, with a IP 66 protection degree, is available off the shelf in many different sizes. The risk for component failure, and with that unnecessary downtime, is eliminated as water and dust are prevented from entering the enclosure. This enclosure range is well suited for industries such as food and beverage and pharmaceuticals, as well as almost all other environments, grade dependant.

CE UKCA cULus_UL Listed Declaration of Compliance DNV-GL EAC GOST IP Declaration of Compliance IEC 61439 Declaration of Compliance
Feature: IP 66 TYPE 4X, 12 IK 10
ASR Web Product Image
Note With mounting plate
Height 800 mm
Width 600 mm
Depth 210 mm
Mounting Plate
770 mm
Mounting Plate
550 mm
Max. enclosure
useful depth
192 mm
No Locks 2
Weight (kg) 27.00
ASR Catalogue drawing image
Item no.: ASR0806021
EAN no.: 8713574120488
  • Technical data
  • Features
  • Downloads
  • CAD
  • Certificates

Technical data


AISI 304L / AISI 316L pre-grained stainless steel. Body: 1.5 mm. Door for AISI 304L: 1.5 mm / 2 mm for enclosures with a height or width of 600 mm or greater. Door for AISI 316L: 2 mm. Mounting plate: 2 mm galvanized steel.


Folded and seam welded. For ease of installation, each back corner of the enclosure is laser-marked to precisely indicate where to drill holes and affix AWS wall mounting brackets.


Corner formed in one piece. Surface mounted, with 130° opening. Concealed AISI 304 stainless steel hinges with captive pin. Can be mounted to allow left or right hand opening. Sealing is ensured by an injected polyurethane gasket. For AISI 316L, sealing is ensured by an injected silicone gasket. Inner M6 welded studs, to mount optional door profiles MMDP.


nVent HOFFMAN customized zamak double-bit 3 mm lock, with 90° movement and anti-vibration mechanism. Two locks for 600 mm high to 800 mm high enclosures. Espagnolette three point locking or 3 locks for 1000 mm high enclosures and above. Stainless steel lock and other versions are available as accessories.

Mounting plate:

The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides, from 800 mm and above, are strengthened by folded edges. By using the AMG accessory, the mounting plate position can be adjusted to any depth.

Cable access:

No gland plate openings as standard, to maximise sealing and cleanliness.


Corresponds with IP 66 | TYPE 4X, 12 | IK 10.


400 pre-grained stainless steel.


Enclosure with door, mounting plate, plastic double-bit 3 mm key, and mounting accessories. Metallic key, for height 1000 mm and above.

Additional information:

For outdoor environments, exposed to precipitation, the use of a rain hood is advised. Also in environments known for quick temperature changes, consideration to condensation should be taken. Please see the thermal management section.



Stainless steel 304(L) and 316(L) single door wall mounted enclosures, available in a wide range of sizes with a high IP 66 protection degree.


Customers can choose enclosures that meet their size requirements, off the shelf. The installed components will be safe and secure inside the enclosure due to the high protection degree.


Customers can receive enclosures with a short delivery time, that match their size requirements. This will also remove any extra costs due to oversizing. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure. Stainless steel enclosures can be installed in almost any environment, grade dependent.

General drawing (PDF) ASR General Drawing 115 KB
Image (JPG 566 x 800 px) ASR Catalogue drawing image 50 KB
Image (JPG 800 x 800 px) ASR Web Product Image 38 KB
Item sheet (PDF) ASR0806021 ENGLISH 373 KB
Mounting instructions document (PDF) Wall mounted ASR 745 KB
Product sheet (PDF) ASR(ENGLISH) 929 KB



* Drawings generated according to ISO standard
Document (PDF) CE UKCA 100 KB
Document (PDF) cULus_UL Listed 427 KB
Document (PDF) Declaration of Compliance 77 KB
Document (PDF) DNV-GL 344 KB
Document (PDF) EAC 2 MB
Document (PDF) GOST 7 MB
Document (PDF) IP Declaration of Compliance 350 KB
Document (PDF) IEC 61439 Declaration of Compliance 102 KB