AFS06063-316 Wall mounted, 600x600x300

The stainless steel single door wall mounted enclosure range, AFS, has an integrated sloping roof and IP 66 protection degree. The risk for component failure, and with that, unnecessary downtime is eliminated as water and dust are prevented from entering the enclosure thanks to the sloping roof and the high protection degree. The AFS range is ideal for industries such as food and beverage and pharmaceuticals, as well as almost all other environments, grade dependant.

CE Declaration of Conformity DNV-GL EAC GOST IP Declaration of Compliance Kema Keur - DEKRA cULus_UL Listed IEC 61439 Declaration of Compliance
Feature: IP 66 TYPE 4X, 12 IK 10
AFS Website Image
Note With mounting plate
Height 600 mm
Width 600 mm
Depth 300 mm
Mounting Plate
575 mm
Mounting Plate
550 mm
Max. enclosure
useful depth
280 mm
Degree of slope 11°
No Locks 2
Weight (kg) 24.30
AFS Catalogue drawing image
Item no.: AFS06063-316
EAN no.: 8713574114531
  • Technical data
  • Features
  • Downloads
  • CAD
  • Certificates

Technical data


AISI 304L / AISI 316L pre-grained stainless steel. Body: 1.5 mm. Door: 1.5 mm / 2 mm for enclosures with a height of 1000 mm or greater. Mounting plate: 2 mm galvanized steel.


Angled 8 to 20°, the sloped-top roof provides a 10 mm overhang to drain liquids and other debris away from the front door. Folded and seam welded. For ease of installation, each back corner of the enclosure is laser-marked to precisely indicate where to drill holes and affix AWS wall mounting brackets.


Corner formed in one piece. Surface mounted with 130° opening. Concealed AISI 304 stainless steel hinges with captive pin. Can be mounted to give left or right hand opening (Machining is required). Sealing is ensured by an injected polyurethane gasket. For AISI 316L, sealing is ensured by an injected silicone gasket.


Zamak double-bit 3 mm lock, with 90° movement. Stainless steel lock and other locks available on request.

Mounting plate:

The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides, from 800 mm and above, are strengthened by folded edges.

Cable access:

No gland openings as standard.


Corresponds with IP 66 | TYPE 4X, 12 | IK 10.


400 pre-grained stainless steel.


Enclosure with door, mounting plate, metallic key and mounting accessories.

Additional information:

In environments known for quick temperature changes, consideration to condensation should be taken. Please see the thermal management section.



Stainless steel 304 and 316(L) single door wall mounted enclosures, with an integrated sloping roof and a high IP 66 protection degree.


The integrated sloping roof reduces the customers assembly time while providing a smooth design free of joints. The installed components inside the enclosure will be safe and secure due to the high protection degree.


The enclosure complies with high cleanliness requirements which makes the enclosure a good solution for industries such as food and beverage or pharmaceuticals. Labour cost is reduced thanks to the integrated sloping roof. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure. Stainless steel enclosures can be installed in almost any environment, grade dependent.

General drawing (PDF) AFS General Drawing 60 KB
Image (JPG 591 x 800 px) AFS Catalogue drawing image 64 KB
Image (JPG 800 x 800 px) AFS Website Image 63 KB
Item sheet (PDF) AFS06063-316 ENGLISH 401 KB
Mounting instructions document (PDF) Wall mounted AFS 1 MB
Product sheet (PDF) AFS(RUSSIAN) 697 KB



* Drawings generated according to ISO standard
Document (PDF) CE Declaration of Conformity 100 KB
Document (PDF) DNV-GL 344 KB
Document (PDF) GOST 7 MB
Document (PDF) IP Declaration of Compliance 350 KB
Document (PDF) Kema Keur - DEKRA 275 KB
Document (PDF) cULus_UL Listed 669 KB
Document (PDF) IEC 61439 Declaration of Compliance 102 KB