AFS06063-316 Wall mounted, 600x600x300

Material:

AISI 304 / AISI 316L pre-grained stainless steel. Body: 1.5 mm. Door: 1.5 mm / 2 mm for enclosures with a height of 1000 mm or greater. Mounting plate: 2 mm galvanized steel.

Body:

The top of the body is equipped with a sloping roof at an angle of between 8 and 20 degrees sloping towards the front, giving a 10 mm overhang to remove any liquids away from the door. Folded and seam welded.

Door:

Corner formed in one piece. Surface mounted with 130° opening. Concealed AISI 304 stainless steel hinges with captive pin. Can be mounted to give left or right hand opening (Machining is required). Sealing is ensured by an injected one piece silicone gasket.

Lock:

Zamak double-bit 3 mm lock with 90° movement. Stainless steel lock and other locks available on request.

Mounting plate:

The mounting plate is marked vertically at 10 mm intervals for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides from 800 mm and above are strengthened by folded edges.

Cable access:

No gland openings as standard.

Protection:

Corresponds with IP 66 | TYPE 4X, 12, 13 | IK 10.

Approvals:

CE, DNV-GL, GOST, Kema Keur - DEKRA, RS, cULus_UL Listed.

Finish:

240s pre grained stainless steel (average 0.5 micron).

Delivery:

Enclosure with door, mounting plate, metallic key and mounting accessories.

Additional information:

In environments known for quick temperature changes, consideration to condensation should be taken. Please see Eldon`s thermal management section.

Feature:

Stainless steel 304 and 316(L) single door wall mounted enclosures, with an integrated sloping roof, silicone gasket and a high IP 66 protection degree.

Advantage:

The integrated sloping roof reduces the customers assembly time while providing a smooth design free of joints. The enclosure is more resistant to chemical agents thanks to the silicone gasket. The installed components inside the enclosure will be safe and secure due to the high protection degree.

Benefit:

The enclosure complies with high cleanliness requirements and reduces labour cost due to the integrated sloped roof. The silicone gasket is resistant to aggressive cleaning products which makes the enclosure a good solution for industries such as food and beverage or pharmaceuticals. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure. Stainless steel enclosures can be installed in almost any environment, grade dependent.