ADR1001030 Настенные шкафы, 1000x1000x300

The double door wall mounted stainless steel enclosure range, ADR, is ideal for installation in confined spaces where a single door, when opened, would take up too much space in front of the enclosure. The doors' loading capacity also increases as it is divided over two doors. With a IP 55 protection degree, components inside the enclosure are well protected and makes it well suited for industries such as food and beverage and pharmaceuticals, as well as almost all other environments, grade dependant.

CE Declaration of Conformity CSA DNV-GL GOST Kema Keur - DEKRA Lloyd's Register Russian Maritime Register of Shipping cULus_UL Listed IEC 61439 Declaration of Compliance
Характеристика: IP 55 TYPE 12, 13 IK 10
ADR Product Image
1000 mm
Mounting Plate
970 mm
Mounting Plate
950 mm
Max. enclosure
useful depth
Nr Locks 1*
Gross weight 66.00
ADR Catalogue drawing image
Номер товара: ADR1001030
Номер EAN: 8713574120303
  • Технические данные
  • Характеристики
  • Загрузки
  • Сертификаты

Технические данные


Шлифованная нержавеющая сталь 304L S15. Корпус: 1,5 мм. Дверь: 2,0 мм. Нержавеющая сталь марки 316L под заказ. Монтажная плата: 2,5 мм оцинкованная листовая сталь.


Закрепляется на штифты М8, приваренные к тыловой части шкафа. В шкафах высотой или шириной 800 мм и более, монтажная плата имеет фальцы со всех четырех сторон для повышения жесткости. Используя аксессуар AMG, можно регулировать глубину установки монтажной платы.



Stainless steel 304 and 316(L) double door wall mounted enclosures, with a IP 55 protection degree.


The space required immediately in front of the enclosure is reduced due to the width of each enclosure door being half that of the enclosure. This also results in the door's loading capacity being higher, as it is split over two doors. The installed components inside the enclosure will be safe and secure due to the high protection degree.


Large enclosures can be installed in areas where there is limited access space. The enclosure's doors can support heavy loads, such as, cooling units, due to its increased loading capability. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure. Stainless steel enclosures can be installed in almost any environment, grade dependent.


The protection degree of double door enclosures is reduced from IP 66 to 55.

Document (PDF) CE Declaration of Conformity 219 KB
Document (PDF) CSA 736 KB
Document (PDF) DNV-GL 344 KB
Document (PDF) GOST 514 KB
Document (PDF) Kema Keur - DEKRA 275 KB
Document (PDF) Lloyd's Register 487 KB
Document (PDF) Russian Maritime Register of Shipping 617 KB
Document (PDF) cULus_UL Listed 669 KB
Document (PDF) IEC 61439 Declaration of Compliance 82 KB