MCSS-HP Stainless steel combinable version, single door enclosure

The stainless steel single door combinable floor standing enclosure range, MCSS-HP, with a IP 66 protection degree offers a higher protection level for equipment and components which will help extend their lifetime and reduce maintenance costs when the enclosure is installed for rough environments with severe conditions.These new enclosures are rated as IP66 even if they are bayed between them using the standard baying brackets.

IP Declaration of Compliance cULus_UL Listed
Feature: IP 66 TYPE 4X, 12 IK 10
MCSS-HP Web Product Image
MCSS-HP Catalogue Render MainMCSS-HP Catalogue drawing image
  • Item list
  • Technical data
  • Features
  • Downloads
  • Certificates

Item list

Item no. Description Height
Mounting Plate
Mounting Plate
Max. enclosure
useful depth
MCSS20086HP Floor standing, 2000x800x600 2000 800 600 1894 694 559

*Other dimensions available on request. Special side panel is required if depth is greater than 700 mm.

Technical data


AISI 304L pre-grained stainless steel / AISI 316L. Frame: 1.5 mm. Door: 2 mm. Rear, roof and side panels: 1.5 mm. Bottom plates: 1.5 mm stainless steel. Mounting plate: 3 mm galvanized steel.


Seam welded reversed open profiles with 25 mm hole pattern, according to DIN 43660. Including integrated external hole pattern.


Mounted with four hinges, allowing left or right hand opening. Including door frame with 25 mm hole pattern.

Rear panel:

Fitted by M6 torx screws. Standard facilities for rear door mounting.

Side panels:

Supplied as an accessory.

Roof panel:



Espagnolette 4-point locking system. Does not interfere with the enclosure inner space. Standard double-bit lock with 3 mm insert. Standard inserts, cylinders, lift handles and T-handles are available as accessories.

Bottom plates:

One piece bottom plate, with injected polyurethane gasket to ensure maximum sealing.

Mounting plate:

Double folded and slides into position. Adjustable in depth by steps of 25 mm, with the MPD02 accessory. Mounting plate is supplied, attached on the outside of the enclosure packaging.


All panels are earthed through their fittings and are equipped with a separate earthing stud.


400s pre-grained stainless steel (0.5 microns average).


Complies with IP 66 | TYPE 4X, 12 | IK 10.

Mounting requirements:

For stand-alone installation, add side panels. For combined installation, HPPG01 and baying brackets, CCI and CCM are required.


Frame with fitted door, rear panel, roof panel, bottom plate, mounting plate and door frame. Delivery also includes earthing bolts. Delivered on a pallet which is identical to the width of the enclosure to allow baying without removal. All packing material is recyclable.



Stainless steel single door combinable floor standing enclosure with a IP 66 protection degree.


A flexible solution where customers can choose enclosures that meet their size requirements, off the shelf, in order to create enclosure configurations made up of smaller individual enclosures. The installed components inside the enclosure will be safe and secure due to the high protection degree.


Customers can receive enclosures with a short delivery time, that match their size requirements. This will also remove any extra costs due to oversizing. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure.


Stainless steel side panels, SPMS, need to be ordered separately, to close individual enclosures and enclosure assembly's, to ensure the stated protection degree is achieved. Baying gasket for IP66, HPPG01, need to be ordered separately to ensure IP 66 in bayed configuration.

General drawing (PDF) MCSS-HP General Drawing 208 KB
Image (JPG 572 x 800 px) MCSS-HP Catalogue drawing image 136 KB
Image (JPG 800 x 800 px) MCSS-HP Catalogue Render Main 56 KB
Image (JPG 600 x 600 px) MCSS-HP Web Product Image 108 KB
Mounting instructions document (PDF) Combinable enclosure, high protection IP66 79 MB
Document (PDF) IP Declaration of Compliance 256 KB
Document (PDF) cULus_UL Listed 514 KB