HDW Hygienic Design, Wall Mounted Enclosure

The Eldon Hygienic Design HDW range is designed and constructed with special materials for high sanitary operations and ease of thorough cleaning. The gapless design, the self-drainable high-polished surfaces, together with a high protection degree help reduce non operative hours, such as cleaning and maintenance, which leads to increased productivity.

CE Declaration of Conformity IP Declaration of Compliance cULus_UL Listed
Feature: IP 66/69/69K TYPE 4X, 12, 13 IK08
HDW Web Product Image
HDW Catalogue drawing image
  • Item list
  • Technical data
  • Features
  • Downloads
  • Certificates

Item list

Item no. Description Total height with sloping roof
Mounting Plate
Mounting Plate
HDW0442215 Wall mounted HD, 442x220x155 442 350 220 155 350 160
HDW0553921 Wall mounted HD, 552x390x210 552 430 390 210 430 330
HDW0606130 Wall mounted HD, 605x610x300 605 430 610 300 430 550
HDW0675121 Wall mounted HD, 672x510x210 672 550 510 210 550 450
HDW0773921 Wall mounted HD, 772x390x210 772 650 390 210 650 330
HDW0776121 Wall mounted HD, 772x610x210 772 650 610 210 650 550
HDW1228130 Wall mounted HD, 1225x810x300 1225 1050 810 300 1050 750
HDW1428130 Wall mounted HD, 1425x810x300 1425 1250 810 300 1250 750

Technical data


Body: 1.5 mm. Door: 2 mm. AISI 304L pre-grained stainless steel. Mounting plate: 2 mm galvanized steel.


Monoblock body, folded and seam welded. The top of the body is equipped with a sloping roof at an angle of 30 degrees towards the front, ending with a 30 mm overhang to avoid any draining liquids from dripping onto the gasket and the door.


Corner formed in one piece with a sloping angle of 8° on all sides. Surface mounted with 120° opening. Concealed hinges with captive pin. Can be mounted to give left or right hand opening (machining is not required).

Internal hinge:

The door hinge has been especially designed to fit concealed inside the enclosure once the door is closed, avoiding dirt deposits that would accumulate if it were outside, thus making the enclosure easy to clean.


Sealing is ensured by an all-round one piece removable blue silicone gasket. The silicone is FDA 21 CFR 177.2600 compliant.


HD lock made of stainless steel AISI 316L with blue silicone gasket, the lock conforms with norm DIN EN 1672-2:2009.

Mounting plate:

Fixed onto M8 studs welded on the rear of the enclosure. All sides from 800 mm and above are strengthened by folded edges. The mounting plate is marked vertically at 10 mm intervals for easy horizontal positioning of equipment.

Cable access:

No gland openings as standard to avoid hygiene risks.


Corresponds with IP 66/69/69K | TYPE 4X, 12, 13 | IK08.


400 Pre-grained stainless steel, polished to Ra < 0.8 µm.


Enclosure with door, mounting plate, metallic key and mounting accessories.

Additional information:

For accessories on the outside of the enclosure please see our HD accessories section.



Hygienic Design stainless steel single door wall mounted enclosures, with smooth self-draining surfaces, integrated sloping roof, silicone gasket, concealed door hinges, Hygienic Design locks and IP 66/69/69K protection degree.


The smooth self-draining sloping surfaces avoid accumulation or pooling of food product, water or chemicals. The gap-free design offers no spaces for contaminants. The high ingress protection degree allows easy and thorough cleaining with high pressure and temperature water jet, while the installed components inside the enclosure will be safe and secure.


The enclosure complies with strict hygiene standards, which reduces cross-contamination risks in industries such as food and beverage or pharmaceuticals. The high protection degree and self-draining surfaces reduce labour cost for maintenance and cleaning. Furthermore component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure. Stainless steel enclosures can be installed in almost any environment.

[Missing text /downloadcenter/ıpdocumentation for en] (PDF) IP Certificate - DEKRA 2 MB
General drawing (PDF) HDW General Drawing 106 KB
Image (JPG 589 x 800 px) HDW Catalogue drawing image 39 KB
Image (JPG 600 x 600 px) HDW Web Product Image 114 KB
Mounting instructions animation (.MP4) Wall Mounted HDW 30 MB
Mounting instructions document (PDF) HDW MI manual_EN 10 MB
Document (PDF) CE Declaration of Conformity 219 KB
Document (PDF) IP Declaration of Compliance 146 KB
Document (PDF) cULus_UL Listed 674 KB