EGL Fan Heater

This fan heater, EGL, uses a fan to distribute the heat generated evenly throughout the enclosure, which means hot spots can be prevented. Water condensation is eliminated, also when the ambient temperature drops sharply.

CE Declaration of Conformity cULus_UL Listed
Feature: IP 20
EGL Product Image
EGL Catalogue drawing image
  • Item list
  • Accessories
  • Technical data
  • Features
  • Downloads
  • Certificates

Item list

Item no. Description Capacity
(W)
Starting current
(A)
L
(mm)
Voltage
(V)
Weight
(kg)
EGL250UL115 Heater 250W 250 2.2 187 104-126 V AC 1.20
EGL250UL230 Heater 250W 250 1.1 187 207-258 V AC 1.20
EGL400UL115 Heater 400W 400 3.6 227 104-126 V AC 1.30
EGL400UL230 Heater 400W 400 1.8 227 207-258 V AC 1.40
Range Mandatory Accessories Related Accessories Similar accessories Description
ETF - -
ETR - - Adjustable temperature thermostat with either a normally open (NO) or normally closed (NC) contact

Technical data

Description:

Heater with fan to be fixed as desired, but preferably in vertical position to prevent condensation. The fan assists the natural convection for fast distribution of the heat in large enclosures. Mounting clip for 35 mm DIN rail (EN60715).

Heating element:

PTC resistor, self regulating and temperature limiting.

Fan life:

40.000 h at 25ºC.

Material:

Plastic, and anodised aluminium profile.

Operating temperature:

-40°C to +70°C. The heating capacity is for ambient temperature 20ºC.

Connection:

Plug terminal connection (2 x 0.5-2.5 mm²).

Protection:

IP 20, Class I (earthed).

Approvals:

CE, EAC, cULus_UL Listed.

Pack quantity:

1 piece.

Features

Feature:

Fan heater, with a high heating capacity.

Advantage:

The generated heat is distributed within the enclosure using forced air, produced by the heater's fan.

Benefit:

When installed, water condensation will be avoided especially in situations when the ambient temperature dramatically drops. As the air will be distributed by the integrated fan, hot spots within the enclosure will be prevented.

Comment:

A thermostat with a normally closed contact, ETR or EFR, is recommended in order to control the heater.

Image (JPG 800 x 518 px) EGL Catalogue drawing image 67 KB
Image (JPG 600 x 600 px) EGL Product Image 58 KB
Mounting instructions document (PDF) Thermal management EHG_EGL 155 KB
Product sheet (PDF) EGL(ENGLISH) 53 KB
Document (PDF) CE Declaration of Conformity 31 KB
Document (PDF) cULus_UL Listed 73 KB