MCSE EMC combinable, single door enclosure

The galvanised steel single door floor standing enclosure range, MCSE, is available off the shelf in different sizes. It is designed to meet EMC requirements. An excellent Faraday effect is created, since electrical conductivity between the enclosure body an door is guaranteed. The risk for component failure, and with that unnecessary downtime, is eliminated as electromagnetic interference is avoided and water and dust are prevented from entering the enclosure. This enclosure range is well suited for applications where EMC is required.

CE Declaration of Conformity GOST cULus_UL Listed
Feature: IP 54 TYPE 12 IK 10
MCSE Product Image
MCSE Catalogue drawing image
  • Item list
  • Accessories
  • Technical data
  • Features
  • Downloads
  • Certificates

Item list

Item no. Description Height
(mm)
Width
(mm)
Depth
(mm)
Mounting Plate
Height
(mm)
Mounting Plate
Width
(mm)
Max. enclosure
useful depth
MCSE20086R5 Floor standing, 2000x800x600 2000 800 600 1894 694 559
MCSE20088R5 Floor standing, 2000x800x600 2000 800 800 1894 694 759

All the MCS standard sizes are available in EMC version on request including other dimensions. For EMC sidepanels see SPME.

Range Mandatory Accessories Related Accessories Similar accessories Description
SPME - -
CBPE - - Zinc plated steel bottom plate for connecting EMI cables in floor standing enclosure
EFE - - EMC filter fan, that maintains the EMC properties, for forced ventilation within the enclosure.
SPD EMC - -
BGE - - EMC gasket for sealing the space between a floor standing enclosure's bottom plates

Technical data

Material:

Frame: 1.5 mm / 1.75 mm zinc plated steel. Door: 2 mm zinc plated steel. Rear, roof and side panels: 1.5 mm zinc plated steel. Mounting plate: 3 mm galvanized steel. Bottom plates: 1 mm galvanized steel.

Frame:

Seam welded reversed open profiles with 25 mm hole pattern according to DIN 43660. Including integrated external hole pattern.

Door:

Surface mounted with four hinges allowing left or right hand opening. Including door frame with 25 mm hole pattern. Sealing is attained by a conductive polyurethane EMC gasket.

Rear panel:

Fitted by M6 torx screws. Standard facilities for rear door mounting.

Side panels:

Supplied as an accessory.

Roof panel:

Removable.

Lock:

Espagnolette 4-point locking system. Does not interfere with the enclosure inner space. Standard double-bit lock with 3 mm pin. Standard inserts, cylinders, lift handles and T-handes are available as accessories.

Mounting plate:

Double folded and slides into position. Adjustable in depth by steps of 25 mm with the MPD02 accessory. In the enclosure delivery, mounting plate is attached on the outside of the package.

Bottom plates:

Consists of three pieces. For 800 mm deep 4 pieces.

Earthing:

All panels are earthed through their fittings and are equipped with a separate earthing stud.

Finish:

RAL 7035 structure powder coating on the outside only.

Protection:

IP 54 | TYPE 12 | IK 10.

Approvals:

CE, GOST, cULus_UL Listed.

Delivery:

Frame with fitted door, rear panel, roof panel, bottom plates, mounting plate and door frame. Delivery also includes earthing bolts and EMI conductive combination gasket. Delivered on a pallet which is identical to the width of the enclosure to allow suiting without removal. All packing material is recyclable.

Note:

Also available in stainless steel (MCSSE).

Features

Feature:

Galvanised steel single door floor standing enclosure, designed to EMC requirements.

Advantage:

A flexible solution where customers can choose enclosures that meet their size requirements, off the shelf, in order to create enclosure configurations made up of smaller individual enclosures. Electric conductivity between the enclosure's body and door is guaranteed, which ensures a good Faraday effect is created.

Benefit:

Customers can receive enclosures with a short delivery time, that match their size requirements. Component and equipment failure, and unnecessary downtime is avoided as the components are protected from electromagnetic interferences as well as from water and dust entering the enclosure.

Comment:

Galvanised steel side panels, SPME, need to be ordered separately, to close individual enclosures and enclosure assembly's, to ensure the stated protection degree and EMC performance is achieved. Only EMC rated accessories or peripherals that affect the enclosure's external walls should be used, using other accessories or peripherals will downgrade the enclosure's EMC performance.

Image (JPG 800 x 618 px) MCSE Catalogue drawing image 161 KB
Image (JPG 600 x 600 px) MCSE Product Image 101 KB
Mounting instructions document (PDF) Floor standing MCSE 7 MB
Document (PDF) CE Declaration of Conformity 91 KB
Document (PDF) GOST 514 KB
Document (PDF) cULus_UL Listed 669 KB