ADR Stainless steel, double door enclosure

The double door wall mounted stainless steel enclosure range, ADR, is ideal for installation in confined spaces where a single door, when opened, would take up too much space in front of the enclosure. The doors' loading capacity also increases as it is divided over two doors. With a IP 55 protection degree, components inside the enclosure are well protected and makes it well suited for industries such as food and beverage and pharmaceuticals, as well as almost all other environments, grade dependant.

CE Declaration of Conformity DNV-GL EAC GOST IP Declaration of Compliance Kema Keur - DEKRA Lloyd's Register cULus_UL Listed IEC 61439 Declaration of Compliance
Feature: IP 55 TYPE 12 IK 10
ADR Product Image
ADR Catalogue drawing image
  • Item list
  • Technical data
  • Features
  • Downloads
  • Certificates

Item list

With mounting plate

Item no. Description Height
Mounting Plate
Mounting Plate
Max. enclosure
useful depth
ADR1001030 Wall mounted, 1000x1000x300 1000 1000 300 970 950 282
ADR1001030-316 Wall mounted, 1000x1000x300 1000 1000 300 970 950 282
ADR1001230 Wall mounted, 1000x1200x300 1000 1200 300 970 1150 282
ADR1001230-316 Wall mounted, 1000x1200x300 1000 1200 300 970 1150 282
ADR1201240 Wall mounted, 1200x1200x400 1200 1200 400 1170 1150 382
ADR1201240-316 Wall mounted, 1200x1200x400 1200 1200 400 1170 1150 382

* 3 point espagnolette locking.

Technical data


AISI 304L / AISI 316L pre-grained stainless steel. Body: 1.5 mm. Door: 2 mm. Mounting plate: 2.5 mm galvanized steel.


Folded and seam welded. For ease of installation, each back corner of the enclosure is laser-marked to precisely indicate where to drill holes and affix AWS wall mounting brackets.


Corner formed in one piece. Surface mounted, with 130° opening. Concealed AISI 304 stainless steel hinges with captive pin. Sealing is ensured by an injected polyurethane gasket. For AISI 316L, sealing is ensured by an injected silicone gasket. Inner M6 welded studs to mount optional door profiles MMDP.


nVent HOFFMAN customized zamak double-bit 3 mm lock, with 90° movement and anti-vibration mechanism. Espagnolette three point locking. Stainless steel lock and other versions are available as accessories.

Mounting plate:

The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides, from 800 mm and above, are strengthened by folded edges. By using the AMG accessory, the mounting plate position can be adjusted to any depth.

Cable access:

No gland plate openings as standard, to maximise sealing and cleanliness.


400 pre-grained stainless steel.


Corresponds with IP 55 | TYPE 12 | IK 10.


Enclosure with door, mounting plate, metallic key and mounting accessories.

Additional information:

For outdoor environments exposed to precipitation, the use of a rain hood is advised. Also in environments known for quick temperature changes, consideration to condensation should be taken. Please see the thermal management section.



Stainless steel 304(L) and 316(L) double door wall mounted enclosures, with a IP 55 protection degree.


The space required immediately in front of the enclosure is reduced due to the width of each enclosure door being half that of the enclosure. This also results in the door's loading capacity being higher, as it is split over two doors. The installed components inside the enclosure will be safe and secure due to the high protection degree.


Large enclosures can be installed in areas where there is limited access space. The enclosure's doors can support heavy loads, such as, cooling units, due to its increased loading capability. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure. Stainless steel enclosures can be installed in almost any environment, grade dependent.


The protection degree of double door enclosures is reduced from IP 66 to 55.

General drawing (PDF) ADR General Drawing 119 KB
Image (JPG 566 x 800 px) ADR Catalogue drawing image 62 KB
Image (JPG 800 x 800 px) ADR Product Image 53 KB
Mounting instructions document (PDF) Wall mounted ADR 1 MB
Product sheet (PDF) ADR(RUSSIAN) 597 KB
Document (PDF) CE Declaration of Conformity 99 KB
Document (PDF) DNV-GL 344 KB
Document (PDF) GOST 7 MB
Document (PDF) IP Declaration of Compliance 350 KB
Document (PDF) Kema Keur - DEKRA 275 KB
Document (PDF) Lloyd's Register 640 KB
Document (PDF) cULus_UL Listed 669 KB
Document (PDF) IEC 61439 Declaration of Compliance 102 KB