ADR Stainless steel, double door enclosure

The double door wall mounted stainless steel enclosure range, ADR, is ideal for installation in confined spaces where a single door, when opened, would take up too much space in front of the enclosure. The doors' loading capacity also increases as it is divided over two doors. With a IP 55 protection degree, components inside the enclosure are well protected and makes it well suited for industries such as food and beverage and pharmaceuticals, as well as almost all other environments, grade dependant.

CE Declaration of Conformity CSA DNV-GL GOST Kema Keur - DEKRA Lloyd's Register Russian Maritime Register of Shipping cULus_UL Listed IEC 61439 Declaration of Compliance
Feature: IP 55 TYPE 12, 13 IK 10
ADR Product Image
ADR Catalogue drawing image
  • Item list
  • Technical data
  • Features
  • Downloads
  • Certificates

Item list

With mounting plate

Item no. Description Height
Mounting Plate
Mounting Plate
Max. enclosure
useful depth
ADR1001030 Wall mounted, 1000x1000x300 1000 1000 300 970 950 282
ADR1001030-316 Wall mounted, 1000x1000x300 1000 1000 300 970 950 282
ADR1001230 Wall mounted, 1000x1200x300 1000 1200 300 970 1150 282
ADR1001230-316 Wall mounted, 1000x1200x300 1000 1200 300 970 1150 282
ADR1201240 Wall mounted, 1200x1200x400 1200 1200 400 1170 1150 382
ADR1201240-316 Wall mounted, 1200x1200x400 1200 1200 400 1170 1150 382

* 3 point espagnolette locking.

Technical data


AISI 304 / AISI 316L pre-grained stainless steel. Body: 1.5 mm. Door: 2 mm. Mounting plate: 2.5 mm galvanized steel.


Folded and seam welded.


Corner formed in one piece. Surface mounted with 130° opening. Concealed AISI 304 stainless steel hinges with captive pin. Located on the inside of the door, are four welded studs for the mounting of equipment profiles. For AISI 316L, sealing is ensured by an injected one piece silicone gasket.


Eldon customized zamak double-bit 3 mm lock with 90° movement and anti-vibration mechanism. Espagnolette three points locking. Stainless steel lock and other versions are available as accessories.

Mounting plate:

The mounting plate is marked vertically at 10 mm intervals for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides from 800 mm and above are strengthened by folded edges. By using the AMG accessory the mounting plate position can be adjusted to any depth.


240s pre grained stainless steel (average 0.5 micron).


Corresponds with IP 55 | TYPE 12, 13 | IK 10.


CE, CSA, DNV-GL, GOST, Kema Keur - DEKRA, Lloyd's Register, RS, cULus_UL Listed.


Enclosure with door, mounting plate, metallic key and mounting accessories.

Additional information:

For outdoor environments exposed to precipitation the use of a rain hood is advised, also in environments known for quick temperature changes, consideration to condensation should be taken. Please see Eldon`s thermal management section.



Stainless steel 304 and 316(L) double door wall mounted enclosures, with a IP 55 protection degree.


The space required immediately in front of the enclosure is reduced due to the width of each enclosure door being half that of the enclosure. This also results in the door's loading capacity being higher, as it is split over two doors. The installed components inside the enclosure will be safe and secure due to the high protection degree.


Large enclosures can be installed in areas where there is limited access space. The enclosure's doors can support heavy loads, such as, cooling units, due to its increased loading capability. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure. Stainless steel enclosures can be installed in almost any environment, grade dependent.


The protection degree of double door enclosures is reduced from IP 66 to 55.

Image (JPG 754 x 800 px) ADR Catalogue drawing image 74 KB
Image (JPG 600 x 600 px) ADR Product Image 156 KB
Mounting instructions document (PDF) Wall mounted ADR 280 KB
Product sheet (PDF) ADR(ENGLISH) 575 KB
Document (PDF) CE Declaration of Conformity 219 KB
Document (PDF) CSA 736 KB
Document (PDF) DNV-GL 344 KB
Document (PDF) GOST 514 KB
Document (PDF) Kema Keur - DEKRA 275 KB
Document (PDF) Lloyd's Register 487 KB
Document (PDF) Russian Maritime Register of Shipping 617 KB
Document (PDF) cULus_UL Listed 669 KB
Document (PDF) IEC 61439 Declaration of Compliance 82 KB