ETF300 Electronic thermostat / hygrostat

This adjustable thermostat and hygrostat, ETF300, with either a normally open (NO) or normally closed (NC) contact, manages both relative humidity and temperature. It is used to control installed devices, such as a fan heater, to turn on or off at the required humidity and temperature levels, that are set by the user. The result is elimination of water condensation at a reduced operational cost.

CE UKCA EAC cRUus_UL Recognized
Feature: IP 20
ETF300 Product Image
ETF300 Catalogue drawing image
  • Item list
  • Technical data
  • Features
  • Downloads
  • Certificates

Item list

Item no. Description Frequency
ETF300 Thermostat/hygrostat 50/60 230 V AC 0.10
ETF300120 Thermostat/hygrostat 50/60 115 V AC 0.10

Technical data


Electronic hygrostat-thermostat monitors the relative humidity and the temperature independently of each other, and it manages heaters and filter fans to prevent condensation and corrosion inside the enclosure. Mounting clip for 35 mm DIN rail (EN 60715).

Setting range:

0 °C to +60 °C, and 40 to 90% R.H.


Plastic according to UL94 V-0.

Switch capacity:

240 V AC, 8(3) A. 120 V AC, 8(3) A. 24 V DC, 4 A. Value in brackets for inductive load.

Operating temperature:

-20 °C to +60 °C.

Service life:

50,000 cycles.


Pole terminal for 2.5 mm².


IP 20.


CE, EAC, cULus_UL Listed.


RAL 7035.

Pack quantity:

1 piece.



Adjustable thermostat and hygrostat, with a normally open (NO) and normally closed (NC) contact.


The thermostat and hygrostat monitors both relative humidity and temperature and can therefore, control a single heater, increasing the enclosures temperature in order to reduce the relative humidity. Customers are able to adjust the relative humidity and temperature inside the enclosure, in order to create a suitable environment for the installed components. The normally open contact will therefore close (turning on the heater) when either, the temperature drops below the set value, or when the relative humidity rises above the set value, this could happen at the same time.


The installed devices, such as fan heaters, automatically turn on or off when they are required, which reduces the operational cost of the control panel. Customers can adjust the required humidity and temperature, which means it can be installed in any enclosure, and is not dependant on the other installed components or equipment. The reliable thermostat and hygrostat manages both the relative humidity and temperature within the enclosure, preventing water condensation from occurring.

Image (JPG 800 x 470 px) ETF300 Catalogue drawing image 70 KB
Image (JPG 600 x 600 px) ETF300 Product Image 94 KB
Mounting instructions document (PDF) Thermal Management ETF300 709 KB
Product sheet (PDF) ETF300(RUSSIAN) 118 KB
Document (PDF) CE UKCA 100 KB
Document (PDF) EAC 881 KB
Document (PDF) cRUus_UL Recognized 207 KB