MPC Console system

This mild steel combinable console system, MPC, has a IP 55/56 protection degree. It includes three interchangeable sections, top, desk and bottom. The system is very flexible and the various possible combinations can meet many design requirements. The ergonomic design of the top and desk units allows for easy installation and access to HMI-equipment, and increases the mounting space available. Stainless steel panels may be used as an alternative for some parts of the console, should it be exposed to chemical agents, etc.

CE Declaration of Conformity CSA GOST Kema Keur - DEKRA Lloyd's Register cULus_UL Listed IEC 61439 Declaration of Compliance
Feature: IP 66 TYPE 4, 12, 13 IK 10 (single door); IP 55 TYPE 12, 13 IK 10 (double door)
MPC Product Image
MPC - MPCS Catalogue drawing image
  • Item list
  • Accessories
  • Technical data
  • Features
  • Downloads
  • Certificates

Item list

Top section units
Mild steel

Item no. Description Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
Mounting Plate
Height
(mm)
Mounting Plate
Width
(mm)
MPC061R5 Top console, 500x600x494 500 600 494 27.40
MPC081R5 Top console, 500x800x494 500 800 494 33.00
MPC101R5 Top console, 500x1000x494 500 1000 494 37.05
MPC121R5 Top console, 500x1200x494 500 1200 494 43.00
MPC161R5 Top console, 500x1600x494 500 1600 494 54.00

Note: Only 1200 mm and 1600 mm wide consoles have double door.

Desk units
Mild steel

Item no. Description Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
Mounting Plate
Height
(mm)
Mounting Plate
Width
(mm)
MPC062R5 Desk console, 250x600x985 250 600 985 36.00
MPC082R5 Desk console, 250x800x985 250 800 985 38.00
MPC102R5 Desk console, 250x1000x985 250 1000 985 43.00
MPC122R5 Desk console, 250x1200x985 250 1200 985 54.00
MPC162R5 Desk console, 250x1600x985 250 1600 985 66.00

Note: Only 1200 mm and 1600 mm wide consoles have double door.

Base units with mounting plate
Mild steel

Item no. Description Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
Mounting Plate
Height
(mm)
Mounting Plate
Width
(mm)
MPC063R5 Base console, 700x600x500 700 600 500 41.00 590 499
MPC083R5 Base console, 700x800x500 700 800 500 49.30 590 699
MPC103R5 Base console, 700x1000x500 700 1000 500 58.00 590 899
MPC123R5 Base console, 700x1200x500 700 1200 500 69.00 590 1099
MPC163R5 Base console, 700x1600x500 700 1600 500 85.00 590 1499

Note: Only 1200 mm and 1600 mm wide consoles have double door.

Range Mandatory Accessories Related Accessories Similar accessories Description
MPLS - -
MPPS - - Stainless steel panel to replace the standard mild steel panel on the top section on console systems
BDP - - Cover plate to cover the top opening of the base or desk unit in MPC consoles
BDPS - - Cover plate to cover the top opening of the base or desk unit in MPCS consoles
PST - - Plinth side panels for mild steel consoles.
PF - - Plinth for mild steel floor standing enclosures with corner pieces and front and rear panels.

Technical data

Material:

Body and door: 1.5 mm mild steel. Rear panel: 1.5 mm mild steel. Bottom plates: 1.2 mm galvanized steel. Mounting plate: 2.5 mm galvanized steel.

Body:

Folded and seam welded. Console construction counts with a base that provides a distance between the fl oor and the lower part of the door/s acting as an integrated plinth.

Doors and panels:

Single folded surface mounted with hinges allowing left and right-hand opening to base door. Top section and desk panels held open by self engage/self release mechanical panel stays. Concealed hinges allowing 90° opening on the desk. Double door on 1200 and 1600 mm wide base units.

Mounting plate:

Standard mounting plate in base unit. Fixed by fixing brackets on C rail, top and bottom for depth adjustment. Optional in desk and top section units.

Lock:

Double-bit 3 mm locks for top section and desk unit. For base, two double-bit 3 mm locks. Other options available. See wall mounting section.

Cable access:

Bottom opening in base unit for cable access. Bottom plates for cable glanding supplied as standard.

Earthing:

M8 threaded studs on bodies, doors and rear panels.

Finish:

RAL 7035 structured powder coating.

Protection:

Single door: IP 66 | TYPE 4, 12, 13 | IK 10. Double door: IP 55 | TYPE 12, 13 | IK 10.

Approvals:

CE, CSA, GOST, Kema Keur - DEKRA, Lloyd's Register, cULus_UL Listed.

Delivery:

The base unit is provided with a mounting plate as standard. Desk and top section units have mounting plates provided as accessories. All top and base openings can be closed by choosing the appropriate accessory plate. Suitable nuts and washers for the various earthing studs are provided.

Features

Feature:

Mild steel combinable console, available in three separate sections, with a IP 55/66 protection degree.

Advantage:

A flexible solution where customers can choose the console sections that meet their size and design requirements, off the shelf, in order to create the console configuration required for their application. Each standalone console section will maintain the security and protection degree.

Benefit:

Customers can receive consoles with a short delivery time, that match their size requirements. The ergonomic design of the top and desk unit, lets customers install and access HMI equipment easily, which increases the console's available mounting space. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure.

Comment:

Stainless steel top section panel (MPPS), and desk unit panel (MPLS) are available as accessories. Console desk and top sections are normally heavily used, due to the installed control components. Therefore, It is recommended to replace the panels on mild steel console, that are exposed to high levels of use, with stainless steel panels. Replacing mild steel sections for stainless steel prolongs the console's life as they are more resistant to corrosion. This is especially important in industries where the operators are exposed to chemical agents and could easily transfer them onto the console, when operated. Single door consoles have a IP66 protection degree whereas double door consoles have a IP55 protection degree.

Image (JPG 594 x 800 px) MPC - MPCS Catalogue drawing image 119 KB
Image (JPG 600 x 600 px) MPC Product Image 77 KB
Mounting instructions document (PDF) HMI MPC-MPCS 768 KB
Product sheet (PDF) MPC(ENGLISH) 824 KB
Document (PDF) CE Declaration of Conformity 145 KB
Document (PDF) CSA 736 KB
Document (PDF) GOST 209 KB
Document (PDF) Kema Keur - DEKRA 769 KB
Document (PDF) Lloyd's Register 481 KB
Document (PDF) cULus_UL Listed 427 KB
Document (PDF) IEC 61439 Declaration of Compliance 45 KB