OICP Operator Interface Control Panel

The aluminium operator interface control panel, OICP, has a pre-machined hole pattern to allow for the desired fixation to a swing arm, plus a removable front plate at a IP 65 protection degree. Components can be easily fitted thanks to the removable front plate, but will also be easily accessible through a removable rear panel. Side handles on the enclosure allow for easy movement of the enclosure into the desired working position. The aluminium body will dissipate more heat than a mild steel body, which may eliminate the need for additional ventilation.

CE Declaration of Conformity GOST
Feature: IP 65
OICP Product Image
OICP Catalogue drawing image
  • Item list
  • Accessories
  • Technical data
  • Features
  • Downloads
  • Certificates

Item list

Item no. Description Height
(mm)
Width
(mm)
Depth
(mm)
Weight
(kg)
OICP305220 HMI, 309x525x200 309 525 200 7.90
OICP343920 HMI, 345x395x200 345 395 200 7.00
OICP355220 HMI, 354x525x200 354 525 200 8.30
OICP395220 HMI, 398x525x200 398 525 200 9.00
OICP414720 HMI, 415x470x200 415 470 200 8.50
OICP495420 HMI, 495x542x200 495 542 200 10.25

The external enclosure dimension is increased by 16,5 mm on the side where there is a grip profile.

Range Mandatory Accessories Related Accessories Similar accessories Description
SAS - -
SAS SM - -
SABW - -
SABT - -
SASJ - -
SAWJV - -
SAWJH - -
SAC - -
SAEC - -
SABW SM - -
SABT SM - -
SASJ SM - -
SAWJV SM - -
SAWJH SM - -
SAC SM - -
SAEC SM - -
OICE - -
SAE - -
SARE - -
SAIJ - -
SAAE - -
SAE SM - -
SAIJ SM - -
SAAE SM - -

Technical data

Material:

Body: Al Mg Si05. Rear plate: Al Mg. Corners: AlSI 12.

Protection:

IP 65.

Finish:

Body and rear plate: anodised aluminium. Corners: RAL 7016.

Approvals:

CE, GOST.

Mounting requirement:

OIFP front panel is not included in the standard delivery and needs to be ordered separately.

Delivery:

Body, screwed rear plate, front plate mounting kit, and mounting accessories.

Features

Feature:

Aluminium operator interface control panel, with a pre-machined hole pattern to mount onto a swing arm system, removable aluminium front plate accessory and a IP 65 protection degree.

Advantage:

Components can be installed easily because of the removable front panel (supplied as an accessory) and accessible because of the removable rear panel. The enclosure's pre-machined cut-out allows the panel to be quickly mounted to the swing arm system in the field. The pre-mounted enclosure side handles allow customers to manipulate the enclosure easily when performing operations. The aluminium body will dissipate a larger amount of heat, that has been generated from the installed components.

Benefit:

The enclosure reduces customer's labour cost and allows ergonomic use in the field, due to the pre-installed handles. The internal temperature of the control panel is kept low which may remove the requirement for ventilation.

Comment:

The aluminium front plate (OIFP), must be ordered separately.

Image (JPG 591 x 800 px) OICP Catalogue drawing image 65 KB
Image (JPG 600 x 600 px) OICP Product Image 167 KB
Mounting instructions document (PDF) HMI OICP 123 KB
Document (PDF) CE Declaration of Conformity 219 KB
Document (PDF) GOST 514 KB