NEW! Office Rack, EOR
Lots of companies do not have a separate room for their networking equipment. Sometimes it’s even necessary to have this equipment located in the office close to the desks. For these requirements Eldon introduces a new solution the Eldon Office Rack (EOR).
The Office Rack is the latest design in the popular ElRack® range available in heights of 12U (600mm high) and 16U (800mm high). Standard width is 600mm. The rack is available in 800mm depth and for server applications there is a 900mm version, so it will not exceed the depth of the desk. Delivery includes an inlaying door with safety glass and cylinder lock mounted at the front side. The side panels and rear panel are equipped with quick release locks for fast and easy access from all sides as is the door. It is possible to secure these panels by the use of two optional cylinder locks.
To remove the heat generated in the rack, a ventilated roof is standard supplied for natural ventilation. This roof can easily be updated to active ventilation by adding a roof ventilator.
Levelling feet to place the rack steady on every underground are also included together with one pair of 19-Inch profiles. The rack has a maximum static load rating of 800kg and is available in colour grey RAL7035 or black RAL9011. All accessories of the ElRack® program can be used which makes the Office Rack very versatile and suitable for any application(s).
The Office Rack is supplied fully assembled mounted on a pallet for easy transportation.
Material: Top and bottom sub-frames, vertical profiles 1.5 mm. Reducers and 19” profiles: 1.5 mm steel plate. Door and plates: 1.5 mm steel plate.
Frame: Top and bottom fully welded sub-frames, with corner junction parts; 4 vertical profiles.
Mounting profiles: 2 pieces of 19” profiles mounted on 2 pair of EDCH+EDWS.
Mounting profiles: 2 pieces of 19” profiles.
Door: In-laying (EDFG) door, mounted with safety glass and round key lock (key no. 333).
Panels: Closed panels mounted on both sides (EDPL) and in the rear (EDRP).
Top and bottom plates: Removable plain top plate (1x EDTP) and ventilation plate (EDFP). Bottom is open, bottom plates available as an accessory.
Protection: Corresponds to IP 30 and NEMA 1 with doors and side panels mounted.
Finish: Powder structure paint grey RAL 7035 or black RAL 9011. Zinc plated 19” profiles.
Delivery: Frame with 1 pair of 19” profiles 2 sets of side mounting profiles (EDCH), side and rear panels, in-laying glazed door in the front and ventilated roof, including levelling feet.
For more information contact your local Eldon Distributor or go to www.eldon.com |