MAS0605021R5 Wall mounted, 600x500x210

The wall mounted range of mild steel IP 66 enclosures has been designed with the user in mind. Practical, efficient and with a wide range of standard sizes and accessories available from stock, the wall mounted range offers a solution to virtually every application, or can be easily customised to suit specific requirements.

CE Declaration of Conformity CSA DNV-GL GOST Kema Keur - DEKRA Lloyd's Register Russian Maritime Register of Shipping cULus_UL Listed IEC 61439 Declaration of Compliance
Feature: IP 66 TYPE 4, 12, 13 IK 10
MAS Product Image
Note With mounting plate
Height 600 mm
Width 500 mm
Depth 210 mm
Mounting Plate
570 mm
Mounting Plate
450 mm
Max. enclosure
useful depth
Gland Plate
Opening Size
410 × 96
Type 3
No. of Gland Plate
No Locks 2
Weight 16.25 Kg
MAS Catalogue drawing image
Item no.: MAS0605021R5
EAN no.: 8713574129139
  • Technical data
  • Downloads
  • Certificates

Technical data


Body: 1.2 mm mild steel for enclosures with a depth of 155 mm / 1.4 mm for enclosures with a depth of 210 or 260 mm / 1.5 mm for enclosures with a depth of 300 or 400 mm, or if a height or width is 1000 mm or greater.


Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter x 2 mm depressions to allow air circulation around the rear part of the enclosure.


Surface mounted with 130º opening. Concealed removable hinges with captive pin. Hinges can be mounted to allow left or right hand opening. There are studs to mount door profiles MMDP included as standard. Sealing is ensured by an injected one piece polyurethane gasket.


Customized lock with double-bit for easy opening of the door. Double-bit 3 mm insert and 90º movement. 1000 mm high enclosures and above have espagnolette three point locking. Other inserts are available as an accessory.

Mounting plate:

The mounting plate is marked vertically at 10 mm intervals for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides from 800 mm and above are strengthened by folded edges. By using the AMG accessory the mounting plate position can be adjusted to any depth.

Gland Plate Opening:

Situated at the far rear of the enclosure to make cabling onto the mounting plate easier.


Complies with IP 66 | TYPE 4, 12, 13 | IK 10. For outdoor installation the use of a rain hood ARF and 100% polyester paint coating is recommended. The corrosion resistance must be taken into consideration.


CE, CSA, DNV-GL, GOST, Kema Keur, Lloyds shipping, RS, cULus_listed.


RAL 7035 structured powder coating.


Enclosure with door and two door mounting profiles, from size MAS0604015R5 and above. Gland plate(s) with gasket(s), plastic double-bit 3 mm key, and mounting accessories. MAS1006026R5 and above, come with a metallic key. Earthing facilities.

CAD 2D drawing (DXF) MAS0605021R5 2 MB
CAD 2D drawing (PDF) MAS0605021R5 475 KB
CAD 3D drawing (STEP) MAS0605021R5 6 MB
EPLAN P8 macros (ZIP) MAS0605021R5 EPLAN 212 KB
Image (JPG 591 x 800 px) MAS Catalogue drawing image 87 KB
Image (JPG 600 x 600 px) MAS Product Image 178 KB
Item sheet (PDF) MAS0605021R5 ENGLISH 126 KB
Mounting instructions document (PDF) Wall mounted MAS 475 KB
Document (PDF) CE Declaration of Conformity 60 KB
Document (PDF) CSA 251 KB
Document (PDF) DNV-GL 199 KB
Document (PDF) GOST 209 KB
Document (PDF) Kema Keur - DEKRA 275 KB
Document (PDF) Lloyd's Register 487 KB
Document (PDF) Russian Maritime Register of Shipping 617 KB
Document (PDF) cULus_UL Listed 427 KB
Document (PDF) IEC 61439 Declaration of Compliance 93 KB